ChinaDrone.Request a quote ↗
COMPONENT

Kpower HB650T 600kg High Torque Brushless

By Kpower ↗

The Kpower HB650T 600kg High Torque Brushless is a servo for drones, special aircraft and industrial automation. It combines a brushless motor, steel gearing and magnetic position sensing in an aluminum-alloy case. Specifications include 600kg·cm stall torque, 24-32V operation, PWM control and an 860g component weight.

Request a quote ↗
Manufacturer and modelKpower HB650T 600kg High Torque Brushless
Product typeUltra-high-torque brushless servo
ApplicationsDrones, special aircraft and industrial automation
Stall torque600kg·cmStall.
No-load speed0.35sec/60°No load.
Travel angle360°Customization supported.

Product overview

The Kpower HB650T 600kg High Torque Brushless is an ultra-high-torque servo for drones, special aircraft and industrial automation. Its physical construction combines an aluminum-alloy case with steel gearing, a brushless motor and 6BB bearings. A magnetic encoder provides position sensing. The servo measures 98.7x48x125.6mm and weighs 860g (30.34oz), with a 25T Φ16mm spline forming its mechanical interface. This is a servo component for incorporation into an aircraft or machine.

The HB650T operates across a 24-32V supply range and uses PWM signaling. Its stall torque is 600kg·cm and its stall current is 8500mA, while its no-load speed is 0.35sec/60°. Angular travel is 360°, with customization supported. Customization is also supported for the signal and protocol and for ingress protection. The specified protection rating is IP42, and the operating temperature range is -40~85°C.

Specifications

SpecificationValue & conditions
Manufacturer and modelKpower HB650T 600kg High Torque Brushless
Product typeUltra-high-torque brushless servo
ApplicationsDrones, special aircraft and industrial automation
Stall torque600kg·cmStall.
No-load speed0.35sec/60°No load.
Travel angle360°Customization supported.
Voltage range24-32V
Dimensions98.7x48x125.6mm
Weight860g (30.34oz)
Stall current8500mAStall.
Case materialAluminum alloy
Gear materialSteel
Spline25T Φ16mm
MotorBrushless
Bearing6BB
Position sensorMagnetic encoder
Signal and protocolPWMCustomization supported.
Ingress protectionIP42Customization supported.
Operating temperature-40~85°C
SOURCE WITH CHINADRONE

Request a quote for Kpower HB650T 600kg High Torque Brushless

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC GEP-CB5 frame parts with plates, arms, mounts, straps and fasteners laid out on white
Propellers & airframes

GEP-CB5 Frame Parts

By GEPRC

GEPRC GEP-CB5 Frame Parts is a selectable component range for the GEP-CB5 Frame Crocodile5 Baby. It covers structural plates and arms, camera and antenna mounting hardware, pads, battery retention, wire protection and fasteners, rather than a complete flight platform.