ChinaDroneRequest a quote →
KINGSAT KM-M4 parabolic tracking antenna with exposed dish and mount in an open radome baseKINGSAT KM-M4 parabolic tracking antenna with exposed dish and mount in an open radome base

KINGSAT KM-M4

The KINGSAT KM-M4 is a high-gain parabolic antenna with a 36 cm dish and three-axis mechanical design for point-to-point tracking. It combines gyro and dual-GNSS stabilization with 23dBi gain, remote tracking to 50KM and data rates up to 400Mbps, housed within an ASA radome.

KINGSATDatalinks, video & radio
Weight
22.5KG (49.6lbs)

Get a free quote

Product overview

The KINGSAT KM-M4 combines a 36 cm (14”) parabolic dish with a three-axis operating platform for point-to-point tracking over distances to 50KM and data rates up to 400Mbps. Its antenna provides 23dBi gain, cross-polarization only and 50Ω input impedance, with a maximum power of 50W. Horizontal and vertical beam widths are each specified as (H) 9° and (V) 9°. The assembly weighs 22.5KG (49.6lbs) and uses an ASA radome measuring 54 X 56.5 cm (21” X 22”).

A built-in gyro and dual GNSS modules support the stabilized tracking mechanism. The antenna points within 0.2 degree of the target station and uses an algorithm to capture the signal peak. An ACU can be configured with multiple targets and an electronic fence for automatic switching based on longitude and latitude. The KM-M4 operates from -30° to 70°C, has IP56 water protection and supports wind speeds up to 60m/sec from any direction, with humidity up to 100% at 40°C.

Links & controllers

Specifications

KINGSAT KM-M4 specifications
SpecificationValue & conditions
ProductKINGSAT KM-M4 high-gain parabolic antenna for point-to-point tracking
Dish diameter36 cm (14”)
Weight22.5KG (49.6lbs)
Radome size54 X 56.5 cm (21” X 22”)
Radome materialASA
Operating platform3-Axis
Azimuth range0° to 690°/Unlimited
Elevation range-25° to 105°
Cross-level range± 35°
Position acquisitionBuilt-in gyro
Supported motion
  • Roll: ± 25° @8~12 sec;
  • Pitch: ± 15° @6~12 sec;
  • Yaw: ± 8° @15~20 sec
Ship motion
Tracking accuracy≤ 1.0dBAutomatic tracking; R.M.S.
Gain23dBi
Horizontal beam width(H) 9°; (V) 9°
Vertical beam width(H) 9°; (V) 9°
VSWR≤1.8
PolarizationCross-pol only
Input impedance50Ω
Front-to-rear ratio32dB
Maximum power50W
Operating temperature-30° ~ 70°C
Storage temperature-30° ~ 85°C
HumidityUp to 100%At 40°C
Maximum wind speed60m/sec maxFrom any direction
Water protectionIP56
Remote rangeTo 50KMPoint-to-point tracking
Data rateUp to 400Mbps
Target pointingWithin 0.2 degree; algorithm captures the signal peakPointing to the target station
Automatic target switchingAutomatic tracking-target switching based on longitude and latitudeACU configured with multiple targets and an electronic fence
Stabilization designThree-axis stabilized mechanical design with a high-sensitivity gyro and dual GNSS modules

Related guides