Product overview
The Kimpok KP-T5815 is an FPV video transmission module for integration into a drone. It provides 80 channels across 4.9GHz-6GHz and five selectable output levels: 1W, 4W, 8W, 12W and 15W. Its hardware combines an aluminum alloy heat sink with a fan, an SMA female inner-hole antenna connector and a 1.0 6P power connector. IRC Tramp control is complemented by separate buttons for band/channel selection and power adjustment, with red, blue and green LEDs indicating channel, band and power respectively.
Installation must accommodate the module’s 65.8mm×37.3mm×19.3mm dimensions and 48.15g weight, using its 20mm×20mm mounting pattern with ø2mm holes. The electrical input is DC 18V-36V, supporting a 6-8S battery. Adequate ventilation space around the transmitter is required to dissipate heat and prevent overheating protection from activating. Before energizing the module, the antenna must be installed and the supply voltage and polarity checked to avoid component damage. Wiring should follow the instruction manual.
Specifications
| Specification | Value & conditions |
|---|---|
| Brand | Kimpok |
| Model | KP-T5815 |
| Place of origin | China |
| Certification | CE certification |
| Product type | FPV wireless video transmitter for drones |
| Frequency range | 4.9–6GHz (4990–5945MHz) |
| Channel count | 80CH |
| Maximum power and adjustable settings | 15W maximum; adjustable 1W/4W/8W/12W/15W |
| Additional RF power rating | 15W; settings 1W/2W/5W/7.5W/15W |
| Input voltage | DC 18V-36VSupports 6-8S battery. |
| Additional power supply rating | 7-36V |
| Antenna connector | SMA female inner hole |
| Control protocol | IRC Tramp |
| Cooling hardware | Aluminum alloy heat sink + fan |
| Mounting hole spacing | 20mm×20mm/ø2mm |
| Dimensions | 65.8mm×37.3mm×19.3mm |
| Weight | 48.15g |
| Channel indicator | Red LED |
| Band indicator | Blue LED |
| Power indicator | Green LED |
| Band and channel control | Band and channel selection button |
| Power control | Power adjustment button |
| Power connector | 1.0 6P power connector |
| Cooling clearance and thermal protection | Insufficient cooling can activate overheating protection, reducing transmission power or shutting transmission down.Installation must provide space for air convection around the module. |
| Voltage and polarity precaution | Check the voltage range and polarity to avoid component damage.Before applying power. |
| Antenna connection precaution | Connect an antenna to the RF output before applying power.Before applying power. |
| Manufacturer brand | Kimpok |
| Frequency range and channels | 4.9GHz-6GHz; 80 channels |
| Maximum power and adjustment settings | 15W maximum; adjustable 1W/4W/8W/12W/15W |
| Band A channel entries | 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725CH1 through CH8, in order. |
| Band B channel entries | 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866CH1 through CH8, in order. |
| Band E channel entries | 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945CH1 through CH8, in order. |
| Band F channel entries | 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880CH1 through CH8, in order. |
| Band R channel entries | 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917CH1 through CH8, in order. |
| Thermal operating requirement | Maintain ventilation for heat dissipation to prevent overheating protection activation.Installation requires adequate ventilation space around the VTX. |
| Electrical connection precaution | Verify voltage range and polarity to avoid component damage.Before powering on. |
| Antenna installation requirement | Install the antenna before applying power.Before powering on. |
| Wiring guidance | Review the instruction manual for proper wiring.Before use. |
