Product overview
The Kimpok ALV3306AC is a video transmitter for long-range FPV racing drones, with selectable 2000mW and 6000mW output. Its hardware includes a built-in cooling fan, an SMA antenna connector and a six-pin JST cable connector. The module measures 50×36×16mm, with a 30.5×30.5mm mounting-hole arrangement, and weighs 40.4g. The supplied kit contains one transmitter, one cable and one antenna. Electrical connections comprise a 7–26V input and a 5V camera supply rated at under 500mA maximum; microphone support is absent.
The transmitter provides 64 channels arranged across eight bands, with channel frequencies spanning 3060–3500MHz. IRC enables remote adjustment of channel and power from the receiver side, and supports OSD configuration. Local button controls also select channels, bands and the two output levels, using LED indications during selection. A three-second startup delay precedes power-amplifier activation. Holding the button for five seconds enters P mode with 0dBm output, and another five-second hold exits it. Dedicated Pit Mode supports full IRC data access.
Specifications
| Specification | Value & conditions |
|---|---|
| Brand | Kimpok |
| Model | ALV3306AC |
| Place of origin | China |
| Certification | CE certification |
| Product purpose | Adjustable video transmitter for long-range FPV racing drones |
| Nominal transmission frequency | 3.3G |
| Input voltage | 7-26V |
| Extra features | IRC 6000mW |
| Camera supply | 5V camera @ under 500mA max.Camera power output. |
| RF output power | 2000mW/6000mWSwitchable output. |
| High-power application | 6 Watts; intended for extreme long-range or penetration applicationsAt 6000mW output. |
| Channel frequency range | 3060-3500MHz |
| Channel count | 64 channels |
| Microphone support | Not supported |
| Antenna connector | SMA |
| Cable connector | JST, 6Pin |
| Dimensions and mounting holes | 50×36×16mm; 30.5×30.5mm (hole) |
| Weight | 40.4g |
| Kit contents | 1x VTX, 1x cable, 1x antennaSupplied kit. |
| Cooling | Built-in cooling fan |
| Remote configuration | Receiver-side adjustment of channel and powerUsing IRC. |
| OSD configuration | SupportedUsing IRC protocol. |
| Channel and band selection | Channel: short press, 8 choices. Band: hold 2 seconds to a flashing letter, then short press; 8 bands, A-b-C-d-E-F-G-H. |
| Power selection | Hold 4 seconds to a rapidly flashing number, then short press: 1 = 2000mW; 2 = 6000mW. |
| P mode output and control | 0dBm output; 5-second hold enters or exits; LED shows P.P mode enabled. |
| Power amplifier activation delay | 3-second delay before power amplifier activationAt power-on. |
| IRC access | Full IRC data accessPit Mode. |
| Frequency channel assignments |
|
