Product overview
The Jiangzhizai YE-01 is a reusable capture-net launcher from Shenzhen Jiangzhizai Innovation Technology Co., Ltd., intended to entangle people or UAVs during aerial capture operations. Its aviation-aluminum and plastic construction measures 248 × 73 × 121 mm and weighs approximately 2.5 kg. A single firing channel uses a 16 g high-pressure nitrogen cylinder to deploy a custom nylon net. The net covers 9 m², measures 3 × 3 m and has 12 × 12 cm mesh; its stated opening distance is 8 m within an effective range of 8–10 m.
Integration provisions include a 12–24 V operating input, an Ethernet port and a specified firing angle of 20° forward. Listed controllers include SIYI MK15/MK32, UniRC 7 and Skydroid H16, G12, G20 and H30. Crosshair laser aiming supports targeting, while app unlocking and an independent unlocking switch provide firing safeguards. The launcher has IP45 protection and a −20°C to 45°C operating range. System power is specified as ≤15 W in the technical specifications and ≤20 W in the feature description. Reuse requires replacement of both the gas cylinder and net.
Specifications
| Specification | Value & conditions |
|---|---|
| Product type | YE-01 capture-net launcher |
| Effective range | 8–10 m |
| Deployed net area and dimensions | 9 m²; 3 m × 3 m |
| Net opening distance | 8 mAfter firing. |
| Capture targets | People and UAVs |
| Aiming assistance | Crosshair laser-assisted aiming |
| Net material | Custom nylon |
| Net tension | 10–25 kgCustom nylon net. |
| Reuse | Reusable launcherReplace the gas cylinder and net before firing again. |
| Named integration platforms | DJI M300 / M350 |
| Mounting arrangement | Quick-release underside mounting |
| Firing angle | 20° forward |
| Control application | DJI Pilot2 |
| Communication distance | Same as the UAVDependent on the host UAV. |
| Payload interface | SKYPORT V2.0, plug-and-play |
| Arming safeguard | Independent unlocking switch to prevent accidental triggering |
| Propulsion cylinder | 16 g high-pressure nitrogen cylinder, 15–18 MPa |
| Recoil | 0.58 kg16 g high-pressure nitrogen cylinder at 15–18 MPa. |
| Ingress protection | IP45 |
| Operating temperature | −20°C to 45°C |
| System power | ≤20 WFeature description. |
| Additional listed compatible platforms | DJI FC100 / FC30 / T70 / T100 / T100S / third-party UAVsTechnical-specification platform listing. |
| Operating temperature | -20°C to 50°CTechnical-specification operating range. |
| Maximum payload | 10 kg |
| Power supply | Powered by the UAV |
| Weight | 2.5 kg |
| Product identity | Jiangzhizai YE-01 capture-net launcher |
| Construction materials | Aviation aluminum and plastic |
| Operating voltage | 12–24 V |
| Dimensions | 248 × 73 × 121 mm |
| Product weight | Approximately 2.5 kg |
| Net mesh size | 12 × 12 cm |
| Propulsion device | 16 g high-pressure nitrogen cylinder |
| Firing channels | 1 |
| Interface type | Ethernet port |
| App arming safeguard | App unlocking switch |
| Listed compatible remote controllers | SIYI MK15 / MK32; UniRC 7; Skydroid H16 / G12 / G20 / H30 |
| Listed integration platforms | Mainstream UAV platforms; DEEP Robotics and Unitree are also listed |
| Independent arming safeguard | Independent unlocking switch to prevent accidental triggering |
