ChinaDroneRequest a quote →
JHEMCU ELRS RX24T2.4G receiver with T-shaped antenna and wiresJHEMCU ELRS RX24T2.4G receiver with T-shaped antenna and wires

JHEMCU ELRS RX24T2.4G

The JHEMCU ELRS RX24T2.4G is a compact 2.4G ISM ExpressLRS receiver with an ESP8285 microcontroller and SX1280IMLTRT RF chip. It operates at 5V with receiving refresh rates of 25HZ to 500HZ. A half-wave dipole omnidirectional T-shaped antenna accompanies the receiver, together with four wires.

JHEMCURC transmitters & receivers
Weight
0.6 g
Dimensions
11 mm × 18 mm × 3 mm

Get a free quote

Product overview

The JHEMCU ELRS RX24T2.4G is an open-source ExpressLRS receiver for connection to a flight controller and binding with a remote control equipped with a 2.4G ELRS module. Its electronics combine an ESP8285 microcontroller with an SX1280IMLTRT RF chip. Operating across 2400 MHZ to 2500 MHZ, it supports receiving refresh rates from a minimum of 25HZ to a maximum of 500HZ. The receiver runs on a 5V supply and measures 11mm × 18mm × 3mm.

The receiver weighs 0.6g excluding its antenna and uses a half-wave dipole omnidirectional T-shaped antenna with a peak gain of 3.16dB. Its indicator light identifies binding mode, absence of a transmission signal, reception of a transmission signal and Wi-Fi upgrade mode. After successful binding, the indicator remains illuminated and telemetry signals can also be received. Each package supplies one receiver, four wires and one T-shaped antenna for connection to the flight controller.

Links & controllers

Specifications

JHEMCU ELRS RX24T2.4G specifications
SpecificationValue & conditions
Product number202378164245
Product typeJHEMCU ELRS RX24T2.4G open-source ExpressLRS receiver
Radio type2.4G ISM
MicrocontrollerESP8285
RF chipSX1280IMLTRT
Frequency range2400 MHZ to 2500 MHZ
Maximum receiving refresh rate500HZ
Minimum receiving refresh rate25HZ
Working voltage5V
Weight0.6gExcluding antenna.
Dimensions11mm × 18mm × 3mm
AntennaHalf-wave dipole omnidirectional T-shaped antenna
Antenna peak gain3.16dB
Indicator light states
  • Double flashing: binding mode;
  • slow flashing: no transmission signal received;
  • continuously on: transmission signal received;
  • flashing: Wi-Fi upgrade mode.
Telemetry receptionTelemetry signal reception is supported.After successful binding.
Package contents1 receiver, 4 wires and 1 T-shaped antennaIncluded equipment.

Related guides