Product overview
The Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC is an interconnection accessory for linking a Pixhawk flight controller to a Tekko32 4in1 ESC. Its two configurations share a JST SHR 8Pin connection at the ESC end, 28awg wire and a 20cm cable length. The flight-controller connection distinguishes the supplied configurations: SKU1203 uses JST GHR 10Pin, while SKU1231 uses 2.54mm Dupont. Procurement selection therefore depends on the specific flight controller and, for Pixhawk 6X/5X, its baseboard.
SKU1203 applies to Pixhawk 6C, Pixhawk 6X/5X with Mini Baseboard, and Pixhawk 4; its Pixhawk 6C applicability explicitly excludes the Mini version. SKU1231 covers Pixhawk 6C Mini, Pixhawk 6X/5X with Standard Baseboard or RPI CM4 Baseboard, Pixhawk 32 v6 & V5, Durandal, and Pixhawk 4 Mini. These configuration distinctions matter when specifying the cable for an installation: the two options have the same stated wire gauge and length but different controller-side connectors and applicability lists.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC |
| Purpose | Cable for connecting Pixhawk flight controllers with Tekko32 4in1 ESCs. |
| Connectors | JST GHR 10Pin to JST SHR 8PinSKU1203 configuration. |
| Wire gauge | 28awgSKU1203 configuration. |
| Cable length | 20cmSKU1203 configuration. |
| Applicable flight controllers and baseboards | Pixhawk 6C (excluding Pixhawk 6C Mini); Pixhawk 6X/5X with Mini Baseboard; Pixhawk 4SKU1203 configuration; Pixhawk 6C Mini excluded. |
| Connectors | 2.54mm Dupont to JST SHR 8PinSKU1231 configuration. |
| Wire gauge | 28awgSKU1231 configuration. |
| Cable length | 20cmSKU1231 configuration. |
| Applicable flight controllers and baseboards | Pixhawk 6C Mini; Pixhawk 6X/5X Standard Baseboard or RPI CM4 Baseboard; Pixhawk 32 v6 & V5; Durandal; Pixhawk 4 MiniSKU1231 configuration. |
