Product overview
HOBBYWING presents the X9 G2L as an integrated propulsion system for agriculture, education and training, logistics, firefighting, surveying and inspection. Its component specifications cover an ESC, motor and MFP 36x11 folding propeller, identifying the product as a propulsion assembly rather than a complete flight platform or airframe-only kit. The published sea-level figures are 24 kg maximum thrust and 7–12 kg recommended takeoff weight per axis. These are distinct selection figures: the per-axis recommendation describes takeoff weight, while maximum thrust.
Mechanical integration centres on a specified 40 mm tube outer diameter. The motor diameter is 104 mm, with a separately stated 130 mm fan diameter; the stator entry gives 96 × 16 mm. Procurement should confirm these published dimensions for the selected configuration. Assembly weight is listed as 1532 g including cable and propellers, subject to the actual product. The 12AWG power cable is 1000 mm long and the signal cable 1090 mm long, both subject to the actual product. The folding propeller uses carbon fibre-reinforced nylon composite material.
Electrical selection must account for 12S–14S LiPo compatibility, rated voltages of 48 V for 12S and 54 V for 14S, and an 18–63 V input range. The ESC provides PWM and CAN throttle signals with a 1050–1950 μs operating pulse width, but does not support throttle travel calibration. Its continuous current rating is 30 A, while 120 A applies for three seconds. The overview lists DroneCAN and HWCAN, defaulting to HWCAN; the ESC table instead names Cyphal (UAVCAN). Confirm the protocol and firmware against the intended controller.
Bluetooth adjustment requires DataLinkBox G3 paired with HOBBYWING DataLink V3 and covers 90% of ESC parameters. Android and iOS are supported; Huawei HarmonyOS is currently unsupported. Operating logs default to one hour and can extend to 24 hours. Flatland mode regulates speed within the operating voltage range; Highland mode adjusts speed within a certain range as altitude increases and is customizable on request. Published environmental specifications are IPX6 and −20–50 °C, to confirm for the selected configuration.
Specifications
| Specification | Value & conditions |
|---|---|
| Product identity and purpose | HOBBYWING X9 G2L integrated UAV propulsion system. |
| Maximum thrust | 24 kgSea-level specification. |
| Recommended takeoff weight per axis | 7–12 kgRecommended takeoff weight per axis at sea level. |
| Efficiency | 9.7–7.7 g/WEfficiency at the recommended takeoff weight. |
| Compatible battery and system rated voltage | 12S–14S LiPo; rated voltage: 14S–54 V / 12S–48 VLiPo compatibility; the system's rated voltage depends on the selected cell count. |
| Input voltage | 18–63 V |
| Tube outer diameter | 40 mm |
| System weight | 1532 g*Weight includes cable and propellers. The asterisk means subject to the actual product. |
| Cable specification | Power cable: 12AWG, 1000 mm*; signal cable: 1090 mm*Both cable lengths carry an asterisk meaning subject to the actual product. |
| Operating temperature | -20–50 °C |
| Ingress protection | IPX6 |
| Rated output power | 1370 WRated output power is specified as maximum continuous. |
| Pinout |
|
| DataLink version | DataLinkBox G3Listed DataLink version; inclusion of the configuration device is not established. |
| ESC rated voltage | 14S / 12S |
| ESC communication protocol | Cyphal (UAVCAN)ESC table entry; the overview separately lists DroneCAN and HWCAN. Confirm protocol and firmware for the selected configuration. |
| ESC current ratings | Peak: 120 A for 3 s; continuous: 30 APeak current applies for three seconds; continuous current is a separate rating. |
| Throttle travel calibration | Not supported |
| Dual throttle signals | PWM + CAN |
| Operating pulse width | 1050–1950 μs |
| Failure storage and logging | Supported |
| Motor KV | 110 KV |
| Motor slots and poles | 36N40P |
| Motor geometry |
|
| Propeller model | MFP 36x11 folding propeller |
| Propeller weights and material | Total weight: 287 g*; single weight: 82 g*; carbon fibre-reinforced nylon composite materialTotal and single weights are both subject to the actual product. |
| Overview protocols and controller integration | DroneCAN and HWCAN, default HWCAN; named controller examples: ArduPilot, VK, BOYING, JIYI and ACFLY.Manufacturer names integration examples; confirm the selected controller, protocol and firmware. |
| Mobile parameter configuration | Bluetooth configuration of 90% of ESC parameters.Requires DataLinkBox G3 and HOBBYWING DataLink V3; Android and iOS are supported, while Huawei HarmonyOS is currently unsupported. |
| Operating-data log duration | Default: 1 hour; up to 24 hoursOne hour is the default recording duration; 24 hours is the stated upper duration. |
| Control modes | Flatland mode regulates motor speed; Highland mode adjusts motor speed within a certain range as altitude increases.Flatland operation is qualified by the operating voltage range. Highland adjustment occurs within a certain range and is customizable on request. |
Request a quote for HOBBYWING X9 G2L
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
