ChinaDroneRequest a quote →
Harxon HX-CUX622A external UAV antenna with black housing and visible base connectorHarxon HX-CUX622A external UAV antenna with black housing and visible base connector

Harxon HX-CUX622A

The Harxon HX-CUX622A is a compact, four-system, full-band external UAV antenna for surveying, mapping, navigation and light-UAV applications. It combines a stable multi-feed phase-center design, broad-beam reception and low wind resistance with an SMA male connector, a weight of ≤38g and IP67 protection when assembled according to the waterproofing instructions.

HarxonDrone flight controller
Applications
Surveying and mapping, navigation and dispatch, and light-UAV applications including aerial photography, remote telemetry, disaster monitoring, traffic patrol and public-security monitoring.
Operating voltage
3.3~12VDC
Waterproof rating
IP67

Get a free quote

Product overview

The Harxon HX-CUX622A is an external UAV antenna covering GPS L1/L2/L5, GLONASS L1/L2/L3, BDS B1/B2/B3, Galileo E1/E5a/E5b/E6 and L-Band. Its applications include surveying and mapping, navigation and dispatch, with particular suitability for light UAVs used for aerial photography, remote telemetry, disaster monitoring, traffic patrol and public-security monitoring. A multi-feed design aligns the phase center with the geometric center, while a high-gain antenna element and broad beam pattern support reception of signals at low elevation angles.

The compact antenna combines a low wind-resistance design with dimensions of 40mm in diameter by 75.2mm and a weight of ≤38g. It features an SMA male connector, right-hand circular polarization and 360° horizontal coverage. The low-noise amplifier provides 33±2dB gain with a noise figure of ≤2dB. Operating voltage is 3.3~12VDC and current is ≤55mA. The operating temperature range is -40°C to +70°C, and IP67 protection applies when assembled in accordance with the waterproofing instructions.

Flight control & navigation

Specifications

Harxon HX-CUX622A specifications
SpecificationValue & conditions
Product typeHarxon HX-CUX622A four-system, full-band external UAV antenna.
ApplicationsSurveying and mapping, navigation and dispatch, and light-UAV applications including aerial photography, remote telemetry, disaster monitoring, traffic patrol and public-security monitoring.
Phase-center designA multi-feed design aligns the phase center with the geometric center for phase-center stability.
Low-elevation receptionA high-gain antenna element and broad beam pattern support low-elevation signal reception.
Aerodynamic designLow wind-resistance design.
Frequency coverageGPS L1/L2/L5; BDS B1/B2/B3; GLONASS L1/L2/L3; Galileo E1/E5a/E5b/E6; L-Band.
Impedance50 ohms
PolarizationRight-hand circular polarization
Horizontal coverage360°
Antenna output VSWR≤2.0
Maximum antenna gain3.5dBi
Low-noise amplifier gain33±2dB
Low-noise amplifier noise figure≤2dB
Low-noise amplifier output VSWR≤2.0
Operating voltage3.3~12VDC
Operating current≤55mA
Antenna dimensionsDiameter 40 × 75.2mm
Antenna weight≤38g
ConnectorSMA male
InstallationInstall according to the installation instructions.
Waterproof ratingIP67Assembled; subject to the waterproofing instructions.
Operating temperature-40°C to +70°C
Storage temperature-55°C to +85°C
Humidity95%Non-condensing.

Related guides