ChinaDroneRequest a quote →

Harxon HX-CUX021A

The Harxon HX-CUX021A is a four-system full-band internal UAV antenna for surveying, mapping, navigation and light UAV applications. Its compact construction combines an antenna and active circuitry, with a multiple-feed design for phase-center stability, broad-beam reception and a first-generation IPEX connector with a 30mm cable.

HarxonDrone flight controller
Applications
Surveying and mapping, navigation and dispatch; light UAV applications including aerial photography, remote telemetry, disaster monitoring, traffic patrol and public security monitoring.
Operating voltage
3.3–12VDC
Overall dimensions
Diameter 45 × height 39.8 mm

Get a free quote

Product overview

The Harxon HX-CUX021A is a four-system full-band internal UAV antenna for surveying, mapping, navigation and dispatch. Its applications extend to light UAV operations including aerial photography, remote telemetry, disaster monitoring, traffic patrol and public security monitoring. Multi-band reception covers BDS B1/B2/B3, GPS L1/L2/L5, GLONASS L1/L2/L3, Galileo E1/E5a/E5b/E6 and QZSS L1/L2/L5/L6. Right-hand circular polarization and 360° horizontal coverage support satellite reception, while the high-gain antenna element and broad radiation beam support reception at low elevation angles.

Built from lightweight, tough material, the antenna uses multiple feed points to align its phase center with its geometric center. The antenna and active circuitry occupy a combined diameter of 45mm and height of 39.8mm. Connection is through a first-generation IPEX connector with a 30mm cable, and mounting uses three M1.8 screws. The low-noise amplifier operates at 3.3–12VDC with current ≤45mA. Operating temperature is -40°C to +70°C, storage temperature is -40°C to +85°C, and humidity is 95%, non-condensing.

Flight control & navigation

Specifications

Harxon HX-CUX021A specifications
SpecificationValue & conditions
ProductHarxon HX-CUX021A four-system full-band internal UAV antenna
ApplicationsSurveying and mapping, navigation and dispatch; light UAV applications including aerial photography, remote telemetry, disaster monitoring, traffic patrol and public security monitoring.
Phase-center designMultiple feed points align the phase center with the geometric center.
Reception characteristicsHigh-gain antenna element with a broad radiation beam for low-elevation signal reception.
ConstructionLightweight, tough antenna construction.
BDS frequency bandsBDS B1/B2/B3
GPS frequency bandsGPS L1/L2/L5
GLONASS frequency bandsGLONASS L1/L2/L3
Galileo frequency bandsGALILEO E1/E5a/E5b/E6
QZSS frequency bandsQZSS L1/L2/L5/L6
Impedance50 ohms
PolarizationRight-hand circular polarization
Horizontal coverage360°
Output VSWR≤2.0
Maximum antenna gain2.8dBi
Gain28±2dBLow-noise amplifier.
Noise figure≤1.5dBLow-noise amplifier.
Operating voltage3.3–12VDCLow-noise amplifier.
Operating current≤45mALow-noise amplifier.
Gain flatness±2dBLow-noise amplifier.
Overall dimensionsDiameter 45 × height 39.8mmAntenna and active circuitry combined.
Connector and cableFirst-generation IPEX connector; 30mm cable
Mounting methodMounting with 3 × M1.8 screws
Operating temperature-40°C to +70°C
Storage temperature-40°C to +85°C
Humidity95%Non-condensing.

Related guides