ChinaDroneRequest a quote →
Harxon HX-CU7006A UAV antenna with silver helical strips on a black body and a green circuit board baseHarxon HX-CU7006A UAV antenna with silver helical strips on a black body and a green circuit board base

Harxon HX-CU7006A

The Harxon HX-CU7006A is a low-profile internal UAV antenna supporting four satellite systems across multiple frequency bands. Designed for light UAV surveying, navigation and monitoring applications, it combines dual quadrifilar helix construction, a stable phase center, low power consumption and a compact ≤15g form with screw mounting and an IPEX male connector.

HarxonDrone flight controller
Applications
Surveying and mapping, navigation and dispatching, and light UAV applications including aerial photography, remote telemetry, disaster monitoring, traffic patrol and security monitoring
Operating voltage
+3.3–+12VDC

Get a free quote

Product overview

The Harxon HX-CU7006A is a low-profile, internally mounted UAV antenna covering GPS L1/L2/L5, BDS B1/B2/B3, GLONASS L1/L2 and GALILEO E1/E5a/E5b. It supports surveying and mapping, navigation and dispatching, with applications in light UAV aerial photography, remote telemetry, disaster monitoring, traffic patrol and security monitoring. Its dual quadrifilar helix design provides strong reception at low elevation angles, while out-of-band suppression and interference resistance support signal reception. A multiple-feed design aligns the stable phase center with the geometric center for centimeter-level positioning accuracy.

Measuring Ø44 × 31.7mm and weighing ≤15g, the antenna combines compact construction with low power consumption for lightweight equipment integration. It uses screw mounting and an IPEX male connector, with customizable mounting design available. The antenna provides 360° horizontal coverage and 2.5dBi maximum gain, while its low-noise amplifier delivers 33±2dB gain with a noise figure of ≤2dB. Operating voltage is +3.3–+12VDC and operating current is ≤55mA. Operating and storage temperatures are both -40°C to +70°C, with humidity specified at 95%, non-condensing.

Flight control & navigation

Specifications

Harxon HX-CU7006A specifications
SpecificationValue & conditions
Product typeHarxon HX-CU7006A low-profile UAV antenna
Antenna designDual quadrifilar helix design for strong low-elevation signal reception
Integration and installation customizationCustomizable mounting design for equipment integration
ApplicationsSurveying and mapping, navigation and dispatching, and light UAV applications including aerial photography, remote telemetry, disaster monitoring, traffic patrol and security monitoring
Positioning and phase-center designCentimeter-level positioning accuracy; stable phase center with a multiple-feed design aligning the phase center with the geometric center
Interference suppressionOut-of-band suppression and interference resistance
Frequency coverageGPS L1/L2/L5; BDS B1/B2/B3; GLONASS L1/L2; GALILEO E1/E5a/E5b
Impedance50 ohms
PolarizationRight-hand circular polarization
Antenna axial ratio≤3dB
Horizontal coverage360°
Antenna output VSWR≤2.0
Maximum antenna gain2.5dBi
Low-noise amplifier gain33±2dB
Low-noise amplifier noise figure≤2dB
Low-noise amplifier output VSWR≤2.0
Gain flatness±2dB
Operating voltage+3.3–+12VDC
Operating current≤55mA
Antenna dimensionsØ44 × 31.7mm
Antenna weight≤15g
ConnectorIPEX connector (male)
Mounting methodScrew mounting
Operating temperature-40°C to +70°C
Storage temperature-40°C to +70°C
Humidity95%Non-condensing.

Related guides