ChinaDroneRequest a quote →
Harxon HX-CSX375A embedded survey antenna with a circular green board and silver central elementHarxon HX-CSX375A embedded survey antenna with a circular green board and silver central element

Harxon HX-CSX375A

The Harxon HX-CSX375A is a compact four-system, full-band embedded survey antenna supporting GPS, GLONASS, BDS and GALILEO. Designed for surveying, robotics and monitoring applications, it combines a multi-feed antenna element, out-of-band interference suppression and an MMCX cable connection in a Φ120 × 15.8mm format.

HarxonDrone flight controller
Applications
Robotics, geodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.
Operating voltage
+3.3 to +12VDC

Get a free quote

Product overview

The Harxon HX-CSX375A supports GPS L1/L2/L5, BDS B1/B2/B3, GLONASS L1/L2/L3 and GALILEO E1/E5a/E5b/E6 signals. Its multi-feed antenna design aligns the phase center with the geometric center to minimize antenna-related measurement error. High antenna-element gain and a wide beam support reception at low elevation angles and rapid satellite acquisition in obstructed environments. The low-noise amplifier suppresses unwanted out-of-band signals to reduce the risk of losing lock.

The embedded antenna measures Φ120 × 15.8mm and uses an MMCX cable for its GNSS connection. It operates from +3.3 to +12VDC with current consumption of ≤45mA, across temperatures from -40°C to +85°C. Applications include robotics, geodetic, marine, waterway and dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations. Its environmental specifications include storage from -55°C to +85°C and 95% non-condensing humidity.

Flight control & navigation

Specifications

Harxon HX-CSX375A specifications
SpecificationValue & conditions
Product typeHarxon HX-CSX375A compact four-system, full-band embedded survey antenna supporting GPS, GLONASS, BDS and GALILEO.
ApplicationsRobotics, geodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.
Phase-center designA multi-feed antenna design aligns the stable phase center with the geometric center to minimize antenna-related measurement error.
Interference suppressionThe antenna LNA suppresses out-of-band electromagnetic signals to reduce the risk of system loss of lock.
Satellite receptionHigh antenna-element gain and a wide beam support low-elevation signal reception and rapid satellite acquisition in obstructed environments.
Frequency rangeGPS L1/L2/L5; BDS B1/B2/B3; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6.
Impedance50 ohms
PolarizationRight-hand circular polarizationGNSS antenna.
Antenna axial ratio≤3dB
Horizontal coverage360°
Antenna output VSWR≤2.0GNSS antenna.
Maximum antenna gain5.5dBiGNSS antenna.
Phase-center error9.5mmL2.
Phase-center error8.5mmL1.
Low-noise amplifier gain30±2dBL1.
Low-noise amplifier gain30±2 dBL2.
Noise figure≤2dBLow-noise amplifier.
Output VSWR≤2.0Low-noise amplifier.
In-band flatness±2dBLow-noise amplifier.
Operating voltage+3.3 to +12VDC
Operating current≤45mA
Differential transmission delay≤5ns
Antenna dimensionsΦ120 × 15.8mm
Connector typeMMCX cableGNSS connection.
Operating temperature-40°C to +85°C
Storage temperature-55°C to +85°C
Humidity95%Non-condensing.

Related guides