ChinaDroneRequest a quote →

Harxon HX-CSX349A

The Harxon HX-CSX349A is a four-system, full-band surveying antenna covering GPS, GLONASS, BDS and GALILEO. Designed for surveying and monitoring applications, it combines a multi-feed-point antenna design, broad-beam reception and an interference-suppressing low-noise amplifier in a Φ122 × 23.3mm assembly with an MMCX-JW connector.

HarxonDrone flight controller
Applications
Geodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.
Operating voltage
+3.3 to +12VDC

Get a free quote

Product overview

The Harxon HX-CSX349A is a four-system, full-band surveying antenna for use with a variety of GPS and BeiDou receivers. Its applications include geodetic, marine, waterway and dredging surveys, alongside seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations. A multi-feed-point design aligns the phase center with the geometric center to reduce antenna-related measurement error. High antenna-element gain and a broad beam support reception at low elevation angles, rapid satellite acquisition in obstructed environments and stable GNSS navigation signal output.

The antenna uses proprietary microwave materials and integrated molding to combine the communication antenna and GNSS positioning antenna substrate, supporting dimensional consistency and stable electrical performance. Its low-noise amplifier suppresses out-of-band interference from other wireless communication systems. The antenna measures Φ122 × 23.3mm and has an MMCX-JW connector. It operates from +3.3 to +12VDC with current consumption of ≤45mA. Operating temperature is -40°C to +85°C, storage temperature is -55°C to +85°C, and the humidity specification is 95%, non-condensing.

Flight control & navigation

Specifications

Harxon HX-CSX349A specifications
SpecificationValue & conditions
Product typeHarxon HX-CSX349A four-system, full-band surveying antenna covering GPS, GLONASS, BDS and GALILEO.
Receiver compatibilityWorks with a variety of GPS and BeiDou receivers.
ApplicationsGeodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.
Antenna feed designMulti-feed-point antenna design aligns the phase center with the geometric center.
Signal receptionHigh antenna-element gain and a broad beam support strong reception at low elevation angles, rapid satellite acquisition in obstructed environments and stable GNSS navigation signal output.Low elevation angles and obstructed environments.
Interference suppressionThe LNA provides out-of-band suppression to reduce unwanted electromagnetic signals, interference from other wireless communication systems and the risk of loss of lock.
ConstructionProprietary microwave materials and integrated molding combine the communication antenna and GNSS positioning antenna substrate, providing lower loss, lighter weight, dimensional precision, consistency and stable electrical performance.
Frequency coverageGPS L1/L2/L5; BDS B1/B2/B3; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; L-Band.
Impedance50 ohms
PolarizationRight-hand circular polarization
Horizontal coverage angle360°
Axial ratio≤3dB
Maximum gain≥5dBi
Phase-center error±2mm
LNA gain, L236±2dBL2 band.
LNA gain, L134±2dBL1 band.
LNA noise figure≤2dB
Output VSWR≤2.0
In-band flatness±2dB
Operating voltage+3.3 to +12VDC
Operating current≤45mA
Differential transmission delay≤5ns
Antenna dimensionsΦ122 × 23.3mm
Connector typeMMCX-JW
Operating temperature-40°C to +85°C
Storage temperature-55°C to +85°C
Humidity95%Non-condensing.

Related guides