ChinaDroneRequest a quote →
Harxon HX-CSX311A internal surveying antenna with a circular green circuit boardHarxon HX-CSX311A internal surveying antenna with a circular green circuit board

Harxon HX-CSX311A

The Harxon HX-CSX311A is an internal surveying antenna combining full-band GPS, GLONASS, BDS and GALILEO reception with 915MHz radio support. Its integrated GNSS and radio construction supports RTK equipment design, while a multi-feed antenna arrangement stabilizes the phase center. Applications span robotics, surveying and structural and geological monitoring.

HarxonDatalinks, video & radio
Operating voltage
+3.3 to +12VDC

Get a free quote

Product overview

The Harxon HX-CSX311A combines GNSS positioning and a 915MHz radio antenna in a single internal surveying antenna, supporting integration into RTK equipment. Its multi-feed design aligns the phase center with the geometric center, with phase center error of ±2mm. High-gain antenna elements and a wide beam support reception of low-elevation signals and rapid satellite acquisition in obstructed environments. Applications include robotics, geodetic and marine surveying, waterway and dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.

The antenna measures Φ122 × 23.8mm, with connector height excluded, and provides SMA-J connections for both GNSS and 915M. GNSS reception uses right-hand circular polarization, while the radio antenna uses vertical polarization; horizontal coverage is 360°. The low-noise amplifier provides 34±2dB gain in the L2 band and 32±2dB in the L1 band, with a noise figure of ≤2dB. Operating power is +3.3 to +12VDC at ≤45mA. The operating temperature range is -40°C to +85°C, with 95% non-condensing humidity.

Flight control & navigationLinks & controllers

Specifications

Harxon HX-CSX311A specifications
SpecificationValue & conditions
Product typeHX-CSX311A four-system, full-band internal surveying antenna
ApplicationsRobotics, geodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations
Integrated constructionIntegrated GNSS and radio antenna design for integration into RTK equipment
Phase center designMulti-feed antenna design aligns the phase center with the geometric center for stable phase center performance
Satellite receptionHigh-gain antenna elements and a wide beam support low-elevation signal reception and rapid satellite acquisition in complex environments with obstructions
Frequency rangeGPS L1/L2/L5; BDS B1/B2/B3; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; 902-928MHz
Impedance50 ohms
PolarizationGNSS antenna: right-hand circular polarization; radio antenna: vertical polarizationGNSS antenna; radio antenna.
Horizontal coverage360°
Output VSWR≤2.0Antenna.
Maximum gainGNSS: 5dBi; 915M: 0.5dBiGNSS; 915M.
Phase center error±2mm
Amplifier gainL2 band: 34±2dB; L1 band: 32±2dBLow-noise amplifier; L2 and L1 bands respectively.
Noise figure≤2dBLow-noise amplifier.
Amplifier output VSWR≤2.0Low-noise amplifier.
In-band flatness±2dBLow-noise amplifier.
Operating voltage+3.3 to +12VDC
Operating current≤45mA
Differential transmission delay≤5nsLow-noise amplifier.
Antenna dimensionsΦ122 × 23.8mmHeight excludes connectors.
Connector typesGNSS: SMA-J; 915M: SMA-JGNSS and 915M connections.
Operating temperature-40°C to +85°C
Storage temperature-55°C to +85°C
Humidity95%Non-condensing.

Related guides