ChinaDroneRequest a quote →

Harxon HX-CSX225A

The Harxon HX-CSX225A is a built-in surveying antenna combining full-band GNSS reception with integrated 4G and WiFi antennas for RTK equipment. Its multi-feed design, air-dielectric composite construction and interference-suppressing LNA support surveying and monitoring applications, with a phase center error of ±2mm.

HarxonDrone flight controller
Applications
Geodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.
Operating voltage
+3.3 to +12VDC

Get a free quote

Product overview

The Harxon HX-CSX225A combines GNSS, 4G and WiFi antennas in an integrated design for RTK equipment. Its GNSS coverage includes GPS, GLONASS, BDS and GALILEO, with additional support for QZSS, IRNSS, SBAS and L-Band signals. Applications include geodetic, marine, waterway and dredging surveys, alongside seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations. Right-hand circular polarization and 360° horizontal coverage accompany a phase center error of ±2mm.

The antenna uses multiple feed points to align its phase center with its geometric center, with a composite structure combining an air dielectric and low-loss microwave laminate. Its low-noise amplifier suppresses out-of-band signals to reduce interference and the risk of loss of lock. Connections comprise GNSS MMCX-JW and IPEX connections for 4G and WiFi. The antenna measures Φ127.8 × 20.3 mm, operates on +3.3 to +12VDC with current ≤45mA, and supports operating temperatures from -40°C to +85°C.

Flight control & navigation

Specifications

Harxon HX-CSX225A specifications
SpecificationValue & conditions
Product typeHarxon HX-CSX225A built-in surveying antenna supporting full-band GPS, GLONASS, BDS and GALILEO signals, with 4G and WiFi frequency compatibility.
ApplicationsGeodetic surveying, marine surveying, waterway surveying, dredging surveys, seismic monitoring, bridge deformation monitoring, landslide monitoring and dockside container operations.
Integrated antenna designIntegrated GNSS, 4G and WiFi antenna design for integration into RTK equipment.
Phase center designMultiple feed points align the phase center with the geometric center.
Interference suppressionThe LNA provides out-of-band rejection to suppress unwanted electromagnetic signals and reduce the risk of loss of lock caused by interference.
ConstructionComposite structure using an air dielectric and low-loss microwave laminate.
Frequency coverageGPS L1/L2/L5; BDS B1I/B2I/B3I/B1C/B2a/B2b; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; QZSS L1/L2/L5/L6; IRNSS L5; L-Band; 4G/WIFI; SBAS L1/L5.
Impedance50 ohms
PolarizationRight-hand circular polarization
Antenna axial ratio≤3dB
Horizontal coverage360°
Antenna output VSWR≤2.0
Peak gain
  • GNSS: 5.5dBi;
  • 4G: 0.5dBi;
  • WiFi: 0.5dBi
GNSS, 4G and WiFi antenna paths, respectively.
Phase center error±2mm
LNA gainL1: 34±2dB; L2: 36±2 dBL1 and L2 bands, respectively.
LNA noise figure≤2dB
LNA output VSWR≤2.0
LNA in-band flatness±2dB
Operating voltage+3.3 to +12VDC
Operating current≤45mA
Differential transmission delay≤5ns
Antenna dimensionsΦ127.8 × 20.3 mm
Connectors
  • GNSS: MMCX-JW;
  • 4G_1: IPEX;
  • 4G_2: IPEX male connector;
  • WiFi: IPEX male connector.
GNSS, 4G_1, 4G_2 and WiFi connections, respectively.
Temperature range-40°C to +85°COperating.
Storage temperature range-55°C to +85°CStorage.
Humidity95%Non-condensing.

Related guides