ChinaDroneRequest a quote →
Harxon HX-CH7005A UAV antenna with a white square element on a green circuit board, viewed from above.Harxon HX-CH7005A UAV antenna with a white square element on a green circuit board, viewed from above.

Harxon HX-CH7005A

The Harxon HX-CH7005A is a small UAV antenna supporting seven frequencies across GPS, GLONASS and BDS. Its compact, low-wind-resistance design combines a stable phase center, high sensitivity and low power consumption for positioning applications on moving platforms. A multiple-feed-point antenna design and interference-suppressing low-noise amplifier support satellite reception.

HarxonDrone flight controller
Applications
Supports use with multiple receivers for navigation and dispatch, tracking and monitoring, and measurement and control; particularly suited to rapidly moving systems, including UAVs and high-precision vehicle applications.
Operating voltage
+3.3–+12VDC

Get a free quote

Product overview

The Harxon HX-CH7005A is a compact, high-gain antenna with low wind resistance for positioning on rapidly moving platforms. Its three-system, seven-frequency reception covers BDS B1/B2/B3, GPS L1/L2 and GLONASS L1/L2. Suitable applications include UAVs, high-precision vehicle systems, navigation and dispatch, tracking and monitoring, and measurement and control. A multiple-feed-point design aligns the phase center with the geometric center, supporting a stable phase center and millimeter-level positioning accuracy. High sensitivity and a broad beam support reception of low-elevation satellite signals.

The antenna measures 65mm × 59mm × 15.5mm, weighs ≤120g and mounts using four M3 screws. It uses an MMCX-C-JW1.5 connector and operates from +3.3–+12VDC with current consumption of ≤55mA. The low-noise amplifier provides 36±2dB gain, a noise figure of ≤2dB and out-of-band suppression to reduce interference and the risk of losing satellite lock. Operating temperature is -40°C to +85°C; storage temperature is -55°C to +85°C. The humidity specification is 95%, non-condensing.

Flight control & navigation

Specifications

Harxon HX-CH7005A specifications
SpecificationValue & conditions
Product typeHarxon HX-CH7005A small UAV antenna
ApplicationsSupports use with multiple receivers for navigation and dispatch, tracking and monitoring, and measurement and control; particularly suited to rapidly moving systems, including UAVs and high-precision vehicle applications.
Antenna designThree-system, seven-frequency internal handheld antenna with high gain, low wind resistance, compact dimensions, high sensitivity and low power consumption.
Phase centerMillimeter-level positioning accuracy with a stable phase center; a multiple-feed-point design aligns the phase center with the geometric center.
Reception and interference suppressionHigh antenna-element gain and a broad beam support low-elevation reception and rapid satellite acquisition in obstructed environments. The LNA suppresses out-of-band interference to reduce the risk of loss of lock.
Frequency rangeBDS B1/B2/B3; GPS L1/L2; GLONASS L1/L2
Impedance50 ohms
PolarizationRight-hand circular polarization
Antenna axial ratio≤3dB
Horizontal coverage angle360°
Output VSWR≤2.0Antenna characteristics.
Maximum antenna gain4dBi
Gain36±2dBLow-noise amplifier.
Noise figure≤2dBLow-noise amplifier.
Output VSWR≤2.0Low-noise amplifier.
Differential transmission delayLess than 5nsLow-noise amplifier.
Operating voltage+3.3–+12VDC
Operating current≤55mA
Antenna dimensions65mm × 59mm × 15.5mm
Antenna weight≤120g
ConnectorMMCX-C-JW1.5
Mounting methodMounts using four M3 screws.
Operating temperature-40°C to +85°C
Storage temperature-55°C to +85°C
Humidity95%Non-condensing.

Related guides