ChinaDroneRequest a quote →
Harxon HX-CG1601A 3D choke ring antenna with gold concentric rings and a white domeHarxon HX-CG1601A 3D choke ring antenna with gold concentric rings and a white dome

Harxon HX-CG1601A

The Harxon HX-CG1601A is a single-frequency 3D choke ring antenna for low Earth orbit signal reception at 1518–1525MHz. It combines left-hand circular polarization, a four-feed-point design and multipath interference resistance with IP67 protection, a TNC female connector and a threaded mounting interface.

HarxonDrone flight controller
Operating voltage
+3.3 to +13VDC
Weight
9.3 kg
Ingress protection
IP67

Get a free quote

Product overview

The Harxon HX-CG1601A receives low Earth orbit signals across 1518–1525MHz using left-hand circular polarization. Its high-gain antenna element combines a wide radiation beam with 360° horizontal coverage to support reception at low elevation angles. In complex environments with obstructions, it supports rapid satellite acquisition and stable GNSS navigation signal output. Maximum antenna gain is 5dBi, while the low-noise amplifier provides 40±2dB gain with a noise figure of ≤2dB and in-band flatness of ±2dB.

A three-dimensional choke ring structure resists multipath interference, while a four-feed-point design closely aligns the phase center with the geometric center. The antenna measures Φ379 × 312mm and weighs 9.3kg unpackaged, or 10.5kg with packaging. It incorporates a TNC female connector and a 5/8-inch, 11-thread mounting interface with a north-direction indicator on the base. IP67 protection accompanies an operating temperature range of -40°C to +85°C. The low-noise amplifier operates from +3.3 to +13VDC and draws ≤30mA.

Flight control & navigation

Specifications

Harxon HX-CG1601A specifications
SpecificationValue & conditions
Product typeHarxon HX-CG1601A single-frequency 3D choke ring antenna for low Earth orbit signal reception
Antenna structureThree-dimensional choke ring structure with a four-feed-point antenna design, multipath interference resistance and closely aligned phase and geometric centers
Signal receptionHigh-gain, wide-beam antenna supports strong low-elevation reception, rapid satellite acquisition and stable GNSS navigation signal outputAt low elevation angles and in complex environments with obstructions.
Ingress protectionIP67
Frequency range1518-1525MHzLow Earth orbit signals.
Impedance50 ohms
PolarizationLeft-hand circular polarization
Antenna axial ratio≤3dB
Horizontal coverage360°
Output VSWR≤2.0Antenna.
Maximum antenna gain5dBi
Phase center error±1mm
Gain40±2dBLow-noise amplifier.
Noise figure≤2dBLow-noise amplifier.
Output VSWR≤1.5Low-noise amplifier.
In-band flatness±2dBLow-noise amplifier.
Operating voltage+3.3 to +13VDCLow-noise amplifier.
Operating current≤30mALow-noise amplifier.
Differential transmission delay≤5nsLow-noise amplifier.
Antenna dimensionsΦ379 × 312mm
Weight9.3kgUnpackaged antenna.
Packaged weight10.5kgWith packaging.
ConnectorTNC female
Mounting5/8-inch, 11-thread mounting; base includes a north-direction indicator
Operating temperature-40°C to +85°C
Storage temperature-55°C to +85°C
Humidity95%Non-condensing.

Related guides