ChinaDrone.Request a quote ↗
COMPONENT

Tattu 30000mAh 5C 22.2V 6S

By Shenzhen Grepow Battery Co., Ltd. ↗

The Grepow Tattu 30000mAh 5C 22.2V 6S is a semi-solid-state NMC811 pouch-cell battery for professional UAV power integration. Its 6S1P architecture combines a 30000mAh nominal capacity with a maximum 209 × 92.5 × 66.5mm envelope. Procurement fit depends on aircraft voltage support, mounting space, battery weight and temperature-dependent discharge limits.

Tattu 30000mAh 5C 22.2V 6S drone battery with power leads and yellow connector
Tattu 30000mAh 5C 22.2V 6S drone battery with power leads and yellow connector
Manufacturer and modelShenzhen Grepow Battery Co., Ltd. Tattu 30000mAh 5C 22.2V 6S
Cell architectureNMC811 pouch-cell, high-specific-energy semi-solid-state UAV battery
Cell configuration6S1P
Nominal voltage22.2V
Nominal capacity30000mAh
Minimum capacity28800mAh

Product overview

Shenzhen Grepow Battery Co., Ltd.’s Tattu 30000mAh 5C 22.2V 6S is a UAV power battery built with NMC811 semi-solid-state pouch cells in a 6S1P arrangement. Intended applications include agricultural spraying, aerial photography, delivery, mapping and aerial surveying. Integration requires a compatible 6S electrical system, suitable mounting and sufficient battery compartment space for its maximum 209 × 92.5 × 66.5mm envelope. Specified battery weight is 2480±100g; the introductory net-weight listing gives a separate ±120g tolerance.

The pack carries a 5C marking, while continuous discharge limits depend on temperature: 6000mA at −20 to 0°C, 15000mA at −0 to 10°C or 45 to 60°C, and 60000mA at 10 to 45°C. Instantaneous discharge is limited to 100A for ≤3 seconds. Standard and fast charging have reference durations of 7.5 and 3.0 hours. Storage beyond three months requires 23±5°C, 65±20%RH and 21.6–23.4V; fully charged storage is prohibited. Two packs must not be connected in parallel for charging.

Specifications

SpecificationValue & conditions
Manufacturer and modelShenzhen Grepow Battery Co., Ltd. Tattu 30000mAh 5C 22.2V 6S
Cell architectureNMC811 pouch-cell, high-specific-energy semi-solid-state UAV battery
Cell configuration6S1P
Nominal voltage22.2V
Nominal capacity30000mAh
Minimum capacity28800mAh
Marked discharge rate5C
Maximum dimensions, L × W × H209 × 92.5 × 66.5mm
Battery weight2480±100g
Net weight with introductory tolerance2480g (±120g)
Battery voltage22.5–23.1V; cell voltage 3.75–3.85VAs shipped.
Discharge termination voltage17.1V
Charging profile
  • Constant current: 15A;
  • constant voltage: 25.2V;
  • cutoff current: 0.02C
Fast charging.
Charging profile6.0A constant current to 25.2V, then 25.2V constant voltage until charging current ≤0.02CStandard charging.
Charging time7.5 hoursStandard charging; reference value.
Charging time3.0 hoursFast charging; reference value.
Maximum continuous discharge current6000mA (0.2C)−20 to 0°C.
Maximum continuous discharge current15000mA (0.5C)−0 to 10°C / 45 to 60°C.
Maximum continuous discharge current60000mA (2C)10 to 45°C.
Maximum instantaneous discharge current100ADuration ≤3 seconds.
Rate-discharge duration≥27.0minStandard charge, followed by a 5-minute rest and discharge at 60A to 17.1V.
Charge/discharge interval30 minutesUnless otherwise specified.
Storage temperature−10 to 45°CStorage.
Storage temperature and humidity23±5°C; 65±20%RHStorage longer than 3 months.
Storage voltage and charge restriction21.6–23.4V; do not store fully chargedStorage longer than 3 months.
Pack assembly and parallel charging restrictionDo not assemble packs yourself or connect two packs in parallel for charging; short circuit or burning may result.
Current limitsCharging current must not exceed the specified maximum; discharge current must also remain within its specified maximum.Charging and discharging.
Electrical and mechanical fitRequires a supported 6S voltage platform and matching battery compartment space, aircraft load capacity and mounting structure.Integration into a UAV.

Ask for the Tattu 30000mAh 5C 22.2V 6S price ↑

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING SEPS 250A-24S safety E-power switch with attached cables.
Batteries & charging

HOBBYWING SEPS 250A

By HOBBYWING

The HOBBYWING SEPS 250A is a high-voltage safety power-switch component with delayed anti-spark startup and encapsulated IP67 protection. Procurement planning should account for its mounting dimensions, wiring and weight, confirm the optional electronic-switch configuration, and retain the cooling qualification attached to its published 250A continuous-current capability.

GEPRC Storm 2S 530mAh 90C LiHV battery with power and balance leads
Batteries & charging

GEPRC Storm 2S 530mAh 90C LiHV Battery

By GEPRC

The GEPRC Storm 2S 530mAh 90C LiHV Battery powers FPV drones and other RC models. The 2S1P pack measures 13x17x64mm, weighs 26g and uses XT30 charging and discharge connectors. Supply includes one battery, with 1C recommended charging current, 3C maximum charging current and 90C discharge capability.