| Product type and module construction | Centimeter-level RTK kit comprising a radio and 9P positioning module; GLED-F9P-RTK module integrates a ZED-F9P high-precision board. |
|---|
| GNSS frequencies | GPS L1/L2, GLONASS G1/G2, BDS B1/B2, GALILEO E1/E5b, QZSS L1/L2 |
|---|
| Positioning mode and channels | Combined GPS+GLONASS+BDS+GALILEO+QZSS positioning; 184 search channels. |
|---|
| Receiver sensitivity | - Reacquisition: -160dBm;
- cold start: -148dBm;
- hot start: -157dBm.
Reacquisition, cold-start and hot-start sensitivity, respectively. |
|---|
| RTK vertical accuracy | RTK ±2.5cm+ 1ppmRTK positioning. |
|---|
| Single-point horizontal and vertical accuracy | Horizontal: 1.5m CEP; vertical: 1.5m CEP.Single-point positioning. |
|---|
| Velocity accuracy | 0.05m/s |
|---|
| Heading accuracy | 0.4degAntenna baseline length of 1m. |
|---|
| Dynamic heading accuracy | 0.3degDynamic heading. |
|---|
| Startup and reacquisition times | Hot start: 2s; reacquisition: 2s.Hot start and reacquisition, respectively. |
|---|
| Output level, protocols and NMEA sentences | TTL level; protocols: NEMA, UBX, RTCM3.3; NMEA sentences: RMC, VTG, GGA, GSA, GSV, GLL. |
|---|
| Update frequency | 0.25Hz – 20Hz; default 1Hz.Default update frequency: 1Hz. |
|---|
| Configuration memory | 4M FLASH; configuration can be changed and is retained after power loss. |
|---|
| Pulse output | Configurable 0.25Hz – 10MHz; default period 1s; high-level duration 100ns.Default period: 1s; high-level duration: 100ns. |
|---|
| Carrier-phase output | Supported through RAWX sentence output. |
|---|
| Speed and acceleration limits | Speed: less than 500m/s; acceleration: less than 4g.Module operating limits. |
|---|
| Module current | 80mA |
|---|
| Module connectors | Two 4-pin sockets with 1.0 pitch. |
|---|
| Module storage temperature | -40℃ ~ + 105℃Storage. |
|---|
| Module status indicators | TX flashes blue when the powered port outputs data. PPS is off without a position fix and flashes blue after a 3D fix. The rover RTK indicator is off outside RTK mode, flashes blue in RTK Float and stays blue in RTK Fixed. The base-station RTK indicator stays off in every state.TX: powered port with data output. PPS: no position fix or 3D fix. RTK: rover mode or base-station operation. |
|---|
| Radio type | DTU wireless data-transmission radio. |
|---|
| Radio frequency and spread-spectrum technology | 902~928MHz; FHSS. |
|---|
| Radio error control and encryption | 32-bit CRC and ARQ; 128-bit AES encryption. |
|---|
| Radio transmit power | 100mw~1000mw |
|---|
| Maximum radio transmission distance | Maximum 60Km. |
|---|
| Radio supply voltage | 9V~36V; recommended 12V.Recommended supply: 12V. |
|---|
| Radio serial and air data rates | Serial baud rate: maximum 230400bps, default 9600bps; air data rate: maximum 276000bps.Default serial baud rate: 9600bps. |
|---|
| Radio operating temperature | -40℃ ~ + 85℃Radio operation. |
|---|
| Receiver roles | Configurable for use as an RTK rover or base station.Receiver configured as an RTK rover or base station. |
|---|
| Radio modes and applications | Industrial wireless serial communication radio supporting point-to-point, point-to-multipoint and network relay modes, for applications including UAV remote-control and telemetry data links. |
|---|