ChinaDroneRequest a quote →

Gesai MPU6000

The Gesai MPU6000, branded GS, is a Kakute F4 V2.4 Stacks flight controller for FPV racing and freestyle drones. Its STM32F405RGT6 processor, MPU6000 inertial sensors and BMP280 barometer support flight control, while integrated Betaflight OSD provides real-time flight information. Battery input is 2S-8S.

GesaiDrone flight controller
Applications
FPV racing and freestyle drones.

Get a free quote

Product overview

The Gesai MPU6000, branded GS, is a Kakute F4 V2.4 Stacks flight controller for FPV racing and freestyle drones. It uses an STM32F405RGT6 processor with an MPU6000 gyroscope and accelerometer, plus a BMP280 barometer for altitude measurement. Integrated Betaflight OSD overlays real-time flight data on the FPV video feed. The controller supports Betaflight firmware and configuration through Betaflight Configurator, with an onboard SD card slot for flight data analysis and a 128 Mbit dataflash chip.

The controller accepts a 2S-8S battery input and incorporates a 5V/2A BEC for camera and VTX peripherals, alongside a 9V/3A BEC optimized for the DJI O3 Air unit. Seven PWM outputs provide six motor outputs and one LED output. The controller measures 37x37mm, weighs 7g and uses 30 x 30mm mounting with Φ4mm holes and M3 grommets. A JST-SH1.0_8pin port serves 4-in-1 ESCs, while a JST-SH1.0_6pin port connects DJI/Caddx HD systems and other VTX equipment.

Flight control & navigation

Specifications

Gesai MPU6000 specifications
SpecificationValue & conditions
BrandGS
Model numberMPU6000
Flight controllerKakute F4 V2.4
ApplicationsFPV racing and freestyle drones.
ProcessorSTM32F405RGT6
Inertial sensorsMPU6000 gyroscope and accelerometer.
BarometerBMP280
OSD chipAT7456E
Flight data overlayIntegrated Betaflight OSD provides real-time flight data overlay on the FPV video feed.
Receiver inputsSBUS, DSMX, PPM and PWM receiver inputs.
Serial receiver supportSBUS, iBus, Spektrum, Crossfire, ESLR.
FirmwareCompatible with Betaflight; configurable via Betaflight Configurator.
Blackbox loggingOnboard SD card slot for flight data analysis.
Dataflash128 Mbit Dataflash chip
Battery input2S-8S
9V BEC9V/3AOptimized for DJI O3 Air unit.
5V BECBuilt-in 5V/2A BECFor peripherals such as the camera and VTX.
PWM outputs7x PWM outputs: 6 motor outputs, 1 LED.
Mounting30 x 30mm, Φ4mm hole with M3 grommets.
Controller dimensions37x37mm
Controller weight7g
ESC connectionJST-SH1.0_8pin portFor 4-in-1 ESCs.
Video system connectionJST-SH1.0_6pin portFor DJI/Caddx HD System and other VTX.

Related guides