ChinaDroneRequest a quote →
Kakute H7 V1.3 flight controller circuit board with USB port and four mounting holesKakute H7 V1.3 flight controller circuit board with USB port and four mounting holes

Kakute H7 V1.3 Stacks

The Gesai Kakute H7 V1.3 Stacks is a flight controller stack for FPV drones, combining the controller with compatible ESCs and a power distribution board. Its STM32H743 processor runs at 480 MHz, supported by onboard sensors, OSD, Bluetooth connectivity and interfaces for eight motor outputs and HD video systems.

GesaiDrone flight controller
Application
FPV drones
Weight
8 g
Dimensions
35x35 mm

Get a free quote

Product overview

The Gesai Kakute H7 V1.3 Stacks combines a Kakute H7 v1.3 flight controller, compatible electronic speed controllers and a power distribution board for FPV drones. The controller uses an STM32H743 32-bit processor running at 480 MHz, an MPU6000 IMU, a BMP280 barometer and an AT7456E OSD. Firmware support covers the KakuteH7 target in BetaFlight v4.2.11 and above, INAV 4.0.0 and above, and ArduPilot 4.2.0 and above. INAV SD card support begins with version 4.1.0. An onboard ESP32-C3 Bluetooth chip supports the SpeedyBee iOS and Android app; Bluetooth switches off when armed and back on when disarmed.

The controller provides six UARTs, with UART2 assigned to Bluetooth telemetry, and nine PWM outputs comprising eight motor outputs and one LED output. Two JST-SH1.0 8pin ESC ports support 4in1 ESCs and x8/octocopter configurations. A JST-SH1.0 6pin VTX port accommodates HD systems such as Caddx Vista and Air Unit. Battery input spans 7V to 42V, while the BEC supplies continuous outputs of 5V 2A and 9V 3A. The controller has USB Type-C connectivity, measures 35x35mm and weighs 8g. Its 30.5 x 30.5mm mounting pattern uses Φ4mm holes with Φ3mm grommets.

Flight control & navigation

Specifications

Kakute H7 V1.3 Stacks specifications
SpecificationValue & conditions
BrandGS
Product configurationKakute H7 v1.3 flight controller with compatible Electronic Speed Controllers (ESCs) and a Power Distribution Board (PDB)
ApplicationFPV drones
BetaFlightKakuteH7 (v4.2.11 and above)
INAVKakuteH7 (4.0.0 & above)SD card support added in 4.1.0.
ArduPilotKakuteH7 (4.2.0 & above)
MCUSTM32H743 32-bit processor running at 480 MHz
IMUMPU6000
BarometerBMP280
OSDAT7456E
Onboard Bluetooth chipESP32-C3
App compatibilitySpeedyBee iOS & Android app compatible
Bluetooth operationAutomatically turns off when armed and turns on when disarmedFlight controller armed or disarmed.
UARTs6x UARTs: 1, 2, 3, 4, 6, 7UART2 used for Bluetooth telemetry.
PWM outputs9x: 8 motor outputs, 1 LED
ESC ports2x JST-SH1.0 8pinFor 4in1 ESCs; x8/Octocopter compatible.
VTX port1x JST-SH1.0 6pinFor HD systems such as Caddx Vista & Air Unit.
Battery input voltage7V to 42V
BEC5V 2A Cont., 9V 3A ContContinuous output ratings.
USBType-C
Mounting30.5 x 30.5mmΦ4mm hole with Φ3mm grommets.
Dimensions35x35mm
Weight8g

Related guides