Product overview
The GEPRC TAKER F722 BLS 80A 8S STACK combines a TAKER F722 8S flight controller with a TAKER H80_8S_BLS 80A four-in-one ESC for UAV flight control and motor power management. Its controller uses an STM32F722 processor, an ICM42688-P SPI IMU and 16M onboard black box storage. Integration connections include six UARTs, Type-C USB and a direct DJI Air Unit connection. An integrated LC filter and independent 5V@3A and 12V@3A BECs support the onboard electronics, alongside BetaFlight OSD with an AT7456E chip.
Installation requires space for the 38.5×38.5mm controller and the larger 56.3*61.1mm ESC, both with 30.5×30.5mm mounting patterns. The ESC’s φ4mm mounting holes become φ3mm when fitted with silicone shock-absorbing rings. Both boards accept 3-8S LiPo input; ESC current ratings are 80A continuous and 85A for five seconds. The stack package supplies both boards, a dual 50V 2200uF filter board, connection cables, an XT90 plug, power cable and mounting hardware. Stack, FC and ESC options distinguish the combined electronics package from its individual components.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | GEPRC TAKER F722 BLS 80A 8S STACK |
| Configuration options | STACK, FC, ESC |
| Dual independent BECs | 12V@3A and 5V@3A |
| Flight controller model | TAKER F722 8S Flight Controller |
| MCU | STM32F722 |
| IMU | ICM42688-P(SPI) |
| Black box storage | 16M onboard |
| OSD | BetaFlight OSD with AT7456E chip |
| BEC configuration | 5V@3A,12V@3A dual BEC |
| Flight controller firmware target | GEPRC_TAKER_F722_8S |
| Dimensions | 38.5×38.5mmFlight controller. |
| Mounting hole spacing | 30.5×30.5mmFlight controller. |
| Input voltage | 3-8S LiPoFlight controller. |
| UART interfaces | 6 UARTs |
| ESC model | TAKER H80_8S_BLS 80A 4IN1 ESC |
| Input voltage | 3-8S LiPoESC. |
| Continuous current | 80AESC. |
| Burst current | 85A (5 seconds)ESC; 5-second burst. |
| Supported protocols | Dshot 150/300/600ESC. |
| Dimensions and mounting | 56.3*61.1mm; mounting hole spacing 30.5×30.5mm; φ4mm holes become φ3mm with silicone shock-absorbing ringsESC; hole diameter changes with the silicone shock-absorbing ring installed. |
| Weight | 28.3gESC. |
| Firmware target | B_X_30ESC. |
| Air Unit connection | Direct plug connection to DJI Air Unit |
| USB interface | Type-C |
| Barometer | Supported |
| Current sensing | SupportedESC. |
| Integrated filter | Integrated LC filter |
| Motor connections | Supports direct insertion of 8 motors |
| Included equipment | 1 × TAKER F722 8S Flight Controller; 1 × TAKER H80_8S_BLS 80A 4IN1 ESC; 1 × filter board (dual 50V 2200uF); 1 × DJI connection cable (SH1.0 6pin 100mm); 2 × FC adapter cables (SH1.0 8pin 30mm); 1 × receiver silicone cable (SH1.0 4pin 150mm); 1 × camera connection cable (SH1.0-SH1.25 3pin 135mm); 1 × VTX connection cable (SH1.0 4pin-6pin 100mm); 1 × XT90 battery plug; 1 × red and black power cable (10AWG 240mm); 4 × M3*30 screws; 4 × M3*25 screws; 8 × nylon nuts (M3); 12 × silicone anti-shake pads (M3)Stack configuration. |
Request a quote for GEPRC TAKER F722 BLS 80A 8S STACK
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
