ChinaDrone.Request a quote ↗
COMPONENT

GEPRC Storm 6S 5000mAh 95C Lipo Battery

By GEPRC ↗

The GEPRC Storm 6S 5000mAh 95C Lipo Battery is a 22.2V LiPo power pack intended for 7.5-11 inch FPV drones. Supplied as one battery, it combines a 6S1P configuration and XT90S connector in a 45*47*165mm, 732g package, with defined charging, temperature and cell-voltage limits.

Request a quote ↗
GEPRC Storm 6S 5000mAh 95C LiPo battery with power leads and yellow connector
GEPRC Storm 6S 5000mAh 95C LiPo battery with power leads and yellow connector
ModelGEPRC Storm 6S 5000mAh 95C Lipo Battery
Battery chemistryLiPo
Capacity5000mAh
Configuration6S1P
Maximum discharge rate95C
Rated voltage22.2V

Product overview

The GEPRC Storm 6S 5000mAh 95C Lipo Battery supplies power for 7.5-11 inch FPV drones. Its LiPo pack uses a 6S1P configuration, with 5000mAh capacity, 22.2V rated voltage and a maximum discharge rating of 95C. Integration must accommodate the 45*47*165mm pack, its 732g weight and XT90S discharge connector. The supplied configuration consists of one battery, making this a power component for an aircraft build rather than a complete flight platform or an airframe kit.

Charging requires a professional LiPo charger, with 1C recommended and charging above 3C prohibited. Charge under supervision with ventilation and heat dissipation, away from flammable materials. Use is limited to 0-45 degrees Celsius; after use, the battery must cool below 45 degrees Celsius before recharging. Cell voltage must remain at or below 4.25V when fully charged and at or above 3.70V after discharge. Long-term storage calls for 3.7-3.8V per cell and charge-discharge activation every 2 months.

Specifications

SpecificationValue & conditions
ModelGEPRC Storm 6S 5000mAh 95C Lipo Battery
Battery chemistryLiPo
Capacity5000mAh
Configuration6S1P
Maximum discharge rate95C
Rated voltage22.2V
Discharge connectorXT90S
Dimensions45*47*165mm
Weight732g
Intended aircraft size7.5-11 inch FPV drone
Package contents1 x GEPRC Storm 6S 5000mAh 95C BatterySupplied equipment.
Initial chargingCharge the battery before use.Before use.
Recommended charging rate1CDuring charging.
Maximum charging rateDo not exceed 3C.During charging.
Charger requirementUse a professional LiPo battery charger; other battery charger types are prohibited.During charging.
Charging supervisionDo not charge unattended.During charging.
Charging environmentKeep away from flammable and explosive items; provide ventilation and heat dissipation.During charging.
Upper cell voltage limitNot higher than 4.25VFully charged, per cell.
Lower cell voltage limitNot lower than 3.70VAfter discharge, per cell.
Operating temperature0-45 degrees CelsiusDuring use.
Temperature before rechargingWait until battery temperature is lower than 45 degrees Celsius.Charging after use.
Storage voltage3.7-3.8VLong-term storage, per cell.
Maintenance intervalPerform charge and discharge activation every 2 months.During long-term storage.
Damaged battery handlingStop using and discard immediately.If swelling or leakage occurs.
Collision inspectionRemove the battery and inspect for damage, leakage, and normal power cord and balance connector connections.After a collision during use.
Environmental restrictionsKeep away from flames, fire sources, liquids and humid environments.
Short-circuit restrictionDo not short-circuit the battery terminals.
Pack modification restrictionDo not disassemble or modify the battery pack.Without permission.
SOURCE WITH CHINADRONE

Request a quote for GEPRC Storm 6S 5000mAh 95C Lipo Battery

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
Beijing Jianfan Technology JF-TS1-6S-22Ah battery packs with connector options
Batteries & charging

JF-TS1-6S-22Ah

By Beijing Jianfan Technology

The Beijing Jianfan Technology JF-TS1-6S-22Ah is a TS1 solid-state lithium-ion battery for industrial UAVs, robots and unmanned boats. The series supports parallel connection for increased capacity. Energy density is 280Wh/kg, with cycle-life figures of 300–800 cycles under the specified discharge rates and 0.5C charging.

SkyRC PC1080neo-6S dual-channel battery charger with color display and carrying handle
Batteries & charging

SkyRC PC1080neo-6S

By SkyRC Technology Co., Ltd.

The SkyRC PC1080neo-6S is a dual-channel industrial charger for 6-cell LiPo and LiHV UAV batteries. It delivers 1080 W total charging power with adjustable current, balancing and storage modes in a 2.43 kg enclosure. A separately purchased G630neo manager expands connections for sequential charging; battery-voltage compatibility and environmental limits govern operation.