Product overview
The GEPRC Storm 6S 1800mAh 120C LiPo Battery supplies power for freestyle and racing quadcopters, with toys and boats also listed as applications. Its 6S1P architecture combines a nominal 22.2V supply with 1800mAh capacity and 39.96Wh of energy. The pack has a flat exterior, a smooth surface and welded power cable connections. Integration must accommodate its 54 × 39 × 78mm dimensions and 284.0g weight, with XT60 specified for both charging and discharge connections.
The supplied configuration is one Storm battery. Its maximum discharge rating is 120C, while charging is limited to 3C. The specification recommends 1C charging, and additional charging guidance recommends 1–1.5C. LiPo cells must remain at or below 4.2V when fully charged and must not discharge below 3.7V. Charging requires a 0–45°C environment, with a recently used pack cooled below 45°C first. For long-term storage, maintain 3.80–3.85V per cell and perform a charge-discharge activation within three months.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and product | GEPRC Storm 6S 1800mAh 120C LiPo Battery |
| Model | Storm 6S1800mAh120C |
| Model number | GEP18006S120A |
| Intended purpose | Battery for freestyle and racing quadcopters. |
| Capacity | 1800mAh |
| Cell configuration | 6S1P |
| Nominal voltage | 22.2V |
| Battery chemistry | LiPo |
| Energy | 39.96Wh |
| Dimensions | 54*39*78(mm) |
| Weight | 284.0g |
| Maximum discharge rate | 120C |
| Charge connector | XT60 |
| Discharge connector | XT60 |
| Recommended charging rate | 1C |
| Maximum charging rate | 3C |
| Additional charging guidance | Charging supports up to 3C; additional guidance recommends 1-1.5C to limit effects on battery service life. |
| Recommended chargers | HOTA D6 PRO, ISDT 608AC and ToolkitRC M6D chargers. |
| Charging-voltage distinction | Maximum charging voltage: 4.35V for high-voltage batteries; 4.2V for ordinary batteries.Ordinary battery versus high-voltage battery charging. |
| Applications | Toys, boats and quadcopters. |
| Supplied configuration | 1 x GEPRC Storm 6S1800mAh120C battery. |
| Physical construction | Flat exterior, smooth surface and welded power cable connections. |
| Maximum cell charging voltage | Not more than 4.2V per cell.LiPo cells at full charge. |
| Minimum cell voltage | Do not discharge below 3.7V per cell; over-discharge can damage the battery and cause swelling.During discharge. |
| Storage voltage | 3.80V-3.85V per cell.Long-term storage. |
| Maintenance cycle | Perform a charge-discharge activation within 3 months.Long-term storage. |
| Charging temperature | 0-45°C.During charging. |
| Cooling requirement | Allow the battery to cool below 45°C before charging.Charging after use. |
| Charging supervision and environment | Do not charge unattended.During charging. |
| Assembly and wiring restriction | Do not disassemble, reassemble or change the wiring because of short-circuit and burning risks. |
Request a quote for GEPRC Storm 6S 1800mAh 120C Lipo Battery
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
