ChinaDrone.Request a quote ↗
COMPONENT

SPAN F405 HD 32bit 50A BEC F405 Flight Controller Stack

By GEPRC ↗

The GEPRC SPAN F405 HD 32bit 50A BEC F405 Flight Controller Stack is a UAV electronics stack pairing an F405 flight controller with a BLHeli_32 four-in-one ESC. It combines onboard sensing, recording and power regulation with DJI digital FPV connectivity, 3-6S LiPo input and supplied mounting hardware and cables.

Request a quote ↗
GEPRC SPAN F405 HD flight controller stack with layered circuit boards and USB-C port
GEPRC SPAN F405 HD flight controller stack with layered circuit boards and USB-C port
ProductGEPRC SPAN F405 HD 32bit 50A BEC F405 Flight Controller Stack
Flight controller MCUSTM32F405
IMUMPU6000(SPI)
Black box storage16Mb onboard Flash
OSDBetaFlight OSD w/ AT7456E chip
BarometerBMP280

Product overview

The GEPRC SPAN F405 HD 32bit 50A BEC F405 Flight Controller Stack combines a GEP-F405-HD controller with a GEPRC G50A four-in-one ESC for UAV flight control and motor control. Its tower arrangement uses a 36x36mm controller board with 4mm mounting holes and grommets reducing them to 3mm. The controller integrates an STM32F405 processor, MPU6000 SPI IMU, BMP280 barometer and 16Mb flash for black box recording. A Type-C USB interface, six UARTs, integrated LC filter and 5V and 9V BEC outputs provide connection and power provisions for integration.

The controller supports a direct connection to the DJI Digital FPV System, with a DJI cable included. Receiver protocol support covers Sbus, PPM, CRSF, DSMX and iBus. Both controller and ESC specify 3-6S LiPo input; the ESC lists 50A continuous current and 55A peak current under a 5S condition. It also provides current sensing and telemetry, with DSHOT1200/DSHOT600, PWM, Multishot and OneShot support. The supplied electronics package includes the controller, ESC, a 35V 470uf capacitor, mounting grommets, two screw lengths, an XT60 power cable and an ESC cable.

Specifications

SpecificationValue & conditions
ProductGEPRC SPAN F405 HD 32bit 50A BEC F405 Flight Controller Stack
Flight controller MCUSTM32F405
IMUMPU6000(SPI)
Black box storage16Mb onboard Flash
OSDBetaFlight OSD w/ AT7456E chip
BarometerBMP280
BEC output5V,9V BEC
Flight controller firmware targetGEPRCF405
Board size and mounting36x36mm board, φ4mm with Grommets φ3mm
Flight controller power input3-6S LiPo
ESC MCUSTM32F051K86(32bit 48mHz)
ESC continuous current50A
ESC peak current55A (5S)5S.
ESC firmware versionGEPRC-BL32-4IN1
ESC input voltage3-6S Lipo
USB interfaceType-C USB
Power filteringIntegrated LC filter
UART interfaces6x UART
Digital FPV integrationDirect plug-in connection to the DJI Digital FPV SystemDJI Digital FPV System.
ESC architectureBLheli_32 50A 4-in-1 ESC
ESC current sensorYes
ESC telemetrySupported
ESC control protocolsDSHOT1200/DSHOT600, PWM, Multishot, OneShot
Receiver protocolsSbus, PPM, CRSF, DSMX, iBus
Receiver supportFrsky XM/XM+/R-XSR; Futaba receivers; DSM/DSMX; FlySky receivers; TBS Crossfire receivers; AC900; most receivers supporting SBUS
Included controller and ESC1x GEP-F405-HD Flight Controller; 1x GEPRC G50A ESCSupplied configuration.
Included capacitor1x 35V 470uf CapacitorSupplied configuration.
Included mounting hardware4x silicon grommets M4 to M3; 4x M3*22mm screws; 4x M3*30mm screwsSupplied configuration.
Included cables1x XT60 Power Cable; 1x ESC Cable; 1x DJI CableSupplied configuration.
SOURCE WITH CHINADRONE

Request a quote for SPAN F405 HD 32bit 50A BEC F405 Flight Controller Stack

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
GEPRC TAKER F405 BLS 50A Stack flight controller and ESC assembly
Flight control & navigation

GEPRC TAKER F405 BLS 50A Stack

By GEPRC

The GEPRC TAKER F405 BLS 50A Stack is a UAV electronics assembly pairing an F405 flight controller with a four-in-one 50A ESC. Designed for direct DJI Air Unit connection, it includes dual independent BEC outputs, onboard logging and mounting accessories. Both boards support 3-6S LiPo input, with different board footprints sharing a 30.5×30.5mm mounting pattern.