Product overview
The GEPRC GEP-PX2.5 Frame is an airframe-only kit for a miniature freestyle or competition quadcopter. Its True X architecture combines a one-piece 3mm 3K carbon-fiber chassis, a 2mm upper deck and 1mm side plates. The frame weighs 22g, measures 104*108mm and has a 125mm motor-to-motor dimension. A CNC-machined aircraft-grade 7075 aluminum structure protects the lens, while chamfered chassis edges finish the carbon-fiber structure. The supplied configuration is one GEP-PX2.5 frame, with flight electronics and propulsion identified separately as recommended equipment.
Integration provisions include lens tilt adjustment from 22 to 55 degrees and forward or backward positioning. A one-piece 3D-printed module holds the antenna and rear LED, while upper or lower battery placement and two types of non-slip pads provide battery mounting options. Recommended components include F3/F4 flight controllers, the listed 1105 through 1206 motor options and batteries from 3S 450mAh to 4S 650mAh. The frame specification gives a 2.5-inch propeller size, while the component recommendation separately lists 2inch propellers; these are distinct specifications.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | GEPRC GEP-PX2.5 Frame |
| Supplied configuration | Airframe-only kit; 1x GEP-PX2.5 |
| Weight | 22g |
| Motor-to-motor dimension | 125mm |
| Propeller size | 2.5 inch |
| Frame size | 104*108mm |
| Bottom plate thickness | 3mm |
| Top plate thickness | 2mm |
| Side plate thickness | 1mm |
| Flight controller | F3/F4Recommended equipment for GEP-PX2.5. |
| Motors | 1105/1106/1107/1108/1206Recommended equipment for GEP-PX2.5. |
| ESC | 12A-20Recommended equipment for GEP-PX2.5. |
| Recommended propeller | 2inchRecommended equipment for GEP-PX2.5. |
| Battery | 3S 450mAh ~ 4S 650mAhRecommended equipment for GEP-PX2.5. |
| Frame layout and intended use | True X frame for freestyle and competition |
| Chassis construction | One-piece 3mm 3K carbon-fiber chassis with a 2mm upper deck |
| Lens protection structure | Precision CNC-machined aircraft-grade 7075 aluminum |
| Chassis edge finish | Chamfered carbon-fiber chassis edges |
| Lens adjustment | 22 to 55 degrees, with forward and backward adjustment |
| Antenna and rear LED mounting | One-piece 3D-printed module for the antenna and rear LED |
| Battery mounting and pads | Upper or lower battery placement; two types of battery non-slip pads |
| Fasteners | YFS screws, strength grade 12.9, with non-slip teeth and anti-rust features |
Request a quote for GEP-PX2.5 Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
