Product overview
The GEPRC GEP-OX-H5 Pika Frame provides the structural basis for a 5-inch racing build, with a 220mm wheelbase and 185*195mm dimensions. Its narrow arms are available in 4mm or 5mm thicknesses, while the base and side boards are each 2mm thick. CNC-machined 3K carbon fiber panels and YFS grade 12.9 screws form the construction. Each arm uses two attachment screws to support quick replacement. The specified frame weight is 80g/91g; a separate additional weight entry lists 200 g.
Integration provisions include 20*20 and 30.5*30.5 flight controller mounting patterns with shock-absorbing silicone columns. Camera installation is limited to Micro-size lenses, using side plates with adjustable screw-hole positions. Upper or lower battery placement gives builders a choice of battery position. The supplied configuration is one frame kit, with 3D-printed accessories including a 35-degree Session mount and antenna retention pieces. Recommended electronics include Kiss/F3/F4/RaceFlight controllers, 20A-50A ESCs and batteries spanning 3S 1300mAh ~ 6S 1500mAh.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEPRC GEP-OX-H5 Pika Frame |
| Supplied configuration | 1 × GEP-OX-H5 frame kit |
| Frame weight | 80g/91g |
| Additional listed weight | 200 g |
| Wheelbase | 220mm |
| Propeller size | 5inch |
| Frame dimensions | 185*195mm |
| Arm thickness options | 4mm Arms, 5mm Arms |
| Arm board thickness | 4mm/5mm |
| Base board thickness | 2mm |
| Side board thickness | 2mm |
| Flight controller | Kiss/F3/F4/RaceFlightRecommended equipment. |
| Motors | 2205 /2206/ 2207 /2305/ 2306 /2407Recommended equipment. |
| ESC | 20A-50ARecommended equipment. |
| Propeller | 5inchRecommended equipment. |
| Battery | 3S 1300mAh ~ 6S 1500mAhRecommended equipment. |
| Camera size limitation | Micro-size camera lens only |
| Camera mounting adjustment | Side-plate mounting with adjustable screw-hole position |
| Arm attachment | Two-screw arm attachment for quick replacement |
| Panel material and machining | CNC-machined 3K carbon fiber panels |
| Fasteners | YFS grade 12.9 screws |
| Flight controller mounting patterns | 20*20 and 30.5*30.5 |
| Flight controller mounting isolation | Shock-absorbing silicone columns |
| Session mount | 3D-printed Session mount at 35 degrees |
| Antenna retention | 3D-printed retention pieces for 5.8g and 2.4g antennas |
| Battery placement | Upper or lower battery placement |
Request a quote for GEP-OX-H5 Pika Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
