Product overview
The GEPRC GEP-CL35 V3 Frame provides an airframe kit for a 3.5 inch camera-equipped UAV build. Its architecture combines main, gimbal and bottom carbon plates with propeller guards and a bottom-mounted camera supported through tuned damping balls. This isolation arrangement is intended to reduce vibration-related image distortion. The main plate has a matte black coating. With a 142mm wheelbase and a specified frame weight of 126.8g, the kit supplies the structural foundation for integration rather than a complete flight platform.
Integration centers on the O4 Air Unit Pro HD digital transmission system, with revised molding providing access to its Type-C port and removable memory card. Flight controller mounting is 25.5mm × 25.5mm, while video transmitter mounting accommodates 20mm × 20mm or 25.5mm × 25.5mm patterns. Motor mounting is 12mm × 12mm, and camera mounting width is 20mm. The GPS mount accommodates 22mm × 22mm × 8.2mm units. These dimensions define the stated integration space; the ducts have a 95mm inner diameter.
The full kit includes the three carbon plates, a pair of propeller guards, equipment mounts, damping components, fasteners and assembly tools. Battery retention hardware comprises anti-slip pads, aluminum strap mounts and two straps measuring 20×220mm and 20×250mm. Four 40mm UFL antenna extension cables and an XT60EW-M plug are included. Individual parts selections also cover plates, guards, mounts and wiring accessories; the separate antenna extension cable selection contains two pieces. The supplied configuration is therefore significant when specifying either the complete frame kit or individual components.
Specifications
| Specification | Value & conditions |
|---|---|
| Product name | GEPRC GEP-CL35 V3 Frame |
| Product configuration | Airframe kit for the Cinelog35 Series, supporting the O4 Air Unit Pro HD digital transmission system. |
| Wheelbase | 142mm |
| Gimbal plate thickness | 2mm |
| Main plate thickness | 3.5mm |
| Bottom plate thickness | 1.5mm |
| Flight controller mounting | 25.5mm × 25.5mm |
| Video transmitter mounting | 20mm × 20mm / 25.5mm × 25.5mm |
| Motor mounting | 12mm × 12mm |
| Camera mounting width | 20mm |
| Duct inner diameter | 95mm |
| Propeller size | 3.5 inch |
| Frame weight | 126.8g |
| Module access | Molded to provide Type-C access for data transfer and access for memory card insertion and removal.O4 Air Unit Pro module installed. |
| Camera isolation architecture | Bottom-mounted camera connected through tuned damping balls for vibration isolation. |
| GPS mount compatibility | Mount compatible with 22mm × 22mm × 8.2mm GPS units.GPS unit dimensions: 22mm × 22mm × 8.2mm. |
| Main plate finish | Main carbon plate with matte black coating. |
| Parts selections | CineLog35 V3 Frame; Main Carbon Plate; Gimbal Carbon Plate; Bottom Carbon Plate; Prop Guard; Screw Pack; 40mm UFL Antenna Extension Cables (2PCS); Capacitor & Receiver & T-Antenna & Power Connector Mount; VTX Antenna & GPS & Camera Mount; XT60EW-M Plug with 14AWG Silicone Wires; Battery Strap Aluminum Mounts. |
| Included structural components | Main carbon plate × 1; gimbal carbon plate × 1; bottom carbon plate × 1; prop guard × 1 pair.Full frame kit. |
| Included equipment mounts | Camera mount × 1; receiver mount × 1; T-antenna mount × 1; capacitor mount × 1; power connector mount × 1; VTX antenna mount × 1; GPS mount × 1; action camera base mount × 1.Full frame kit. |
| Included antenna, power and battery accessories | 40mm UFL antenna extension cables × 4; battery anti-slip pads × 2 sets; battery strap aluminum mounts × 2; XT60EW-M plug × 1; 20×220mm battery strap × 1; 20×250mm battery strap × 1.Full frame kit. |
| Included assembly and damping components | M2*3.3*25 textured aluminum standoffs × 4; motor wire management tubes × 4; small action camera base × 1; camera damping balls × 6; gimbal damping balls × 4.Full frame kit. |
| Included tools and keychain | Damping ball installation tool × 1; 3.0mm, 2.0mm and 1.0mm L-shaped hex wrenches × 1 each; M8 wrench × 1; keychain × 1.Full frame kit. |
| Included screw pack | M2*7 pan head screws × 20; M2*8 pan head screws × 16; M2*6 pan head screws × 6; M2*5 pan head screws × 4; M2.5*6 pan head screws × 4; M2 hex nuts × 10; M3 press-fit nuts × 4; M2 press-fit nuts × 12.Full frame kit. |
Request a quote for GEP-CL35 V3 Frame
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
