Product overview
The GEPRC GEP 4S 530mAh is a LiHV battery intended to power 2-3 inch drones, with additional applications in toys, boats and quadcopters. Its 4S1P architecture provides a nominal 15.2V and 8.06WH of energy. For installation planning, the pack measures 17*25*64.5(mm), weighs 51.2g and uses XT30 connectors for charging and discharge. The supplied configuration is one battery. Its discharge ratings are 90C continuous and 180C burst, providing separate limits for sustained and brief power demand.
Charging requires attention to both current and cell voltage. The specified recommended current is 1C, while the FAQ recommends 1-1.5C; both give a 3C maximum. The LiHV charging instructions limit full charge to 4.35v per cell, although the general high-voltage FAQ gives 4.3V. Discharge must remain at or above 3.5V per cell. Charge within 0-45°C and let a recently used pack cool below 45°C first. For long-term storage, maintain 3.80V-3.85V per cell and perform a charge-discharge activation within three months.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | GEP 4S 530mAh |
| Capacity | 530mAh |
| Configuration | 4S1P |
| Nominal voltage | 15.2V |
| Battery type | LiHV |
| Energy | 8.06WH |
| Weight | 51.2g |
| Dimensions | 17*25*64.5(mm) |
| Maximum continuous discharge rating | 90CContinuous discharge. |
| Maximum burst discharge rating | 180CBurst discharge. |
| Charge connector | XT30 |
| Discharge connector | XT30 |
| Recommended charging current | 1C |
| Maximum charging current | 3C |
| Working temperature for charging | 0-45°CCharging. |
| Working temperature for discharge | -20-60°CDischarging. |
| Working humidity | 65%RH +/-20%Operation. |
| Storage temperature | -20-35°CStorage. |
| Storage humidity | 65%RH +/-20%Storage. |
| Cycle life | 300+times |
| FAQ maximum charging voltage | 4.3V for a high-voltage battery; 4.2V for an ordinary battery. This differs from the 4.35v LiHV single-cell limit in the charging instructions.High-voltage battery; general FAQ description. |
| FAQ charging-rate guidance | Up to 3C; recommended 1-1.5C, described as having basically no effect on battery service life. |
| Recommended chargers | HOTA D6 PRO, ISDT 608AC and ToolkitRC M6D |
| Intended drone size | 2-3 inch drones |
| Applications | Toys, boats and quadcopters |
| Included equipment | 1 x GEPRC 4S 530mAh 90/180C battery |
| Charging-instruction voltage limit | Not more than 4.35v per cellLiHV battery; single-cell full-charge voltage. |
| Minimum discharge voltage | Cannot be lower than 3.5V per cell; over-discharge causes damage and swelling.LiPo and LiHV batteries; single-cell discharge voltage. |
| Storage voltage and maintenance | Maintain 3.80V-3.85V per cell; perform a charge-discharge activation within 3 months.Long-term storage. |
| Cooling before charging | Allow the battery to cool below 45°C before charging.Charging after use. |
Request a quote for GEPRC 4S 530mAh 90/180C HV 3.8V/4.35V LiHV Battery
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
