Product overview
The FOXEER Reaper AIO combines an STM32F745 flight controller with four ESC channels in a 32.5 × 32.5 mm assembly weighing 8.6 g. Its mounting pattern is 25.5 × 25.5 mm, with Φ3 mm/M2 mounting holes. For integration, it provides five UART sets, Micro USB and an eight-pin DJI connector. A DC5V/2.5A BEC supplies regulated output, while BF OSD and 16M flash memory provide the specified on-screen display and black-box facilities. Firmware targets are BF:FOXEERF745_AIO and Inav:FOXEERF745AIO.
The power input is 2–6S LiPo at 8.4–25.2 V, with ESC ratings of 45 A continuous and 50 A burst across each of four channels. The ESC uses G-H-30 BLS 16.7 firmware, BLHeli-S programming and Dshot300/600 input; stick programming and current sensing are supported, with current scale 100. Telemetry is unavailable. The supplied hardware includes one AIO, rubber columns, XT30 and DJI cables, plus an item designated “Capacity.” Operating limits are −20 to +55°C and 20–95% humidity; storage temperature is −20 to +70°C.
Specifications
| Specification | Value & conditions |
|---|---|
| Model | FOXEER Reaper AIO |
| CPU | STM32F745 |
| Power supply | 2~6S Lipo(8.4~25.2V) |
| BEC output | DC5V/2.5A |
| OSD | BF OSD |
| Black box | 16M Flash Memory |
| UART | 5 Set |
| USB | Micro USB |
| Flight controller firmware targets | BF:FOXEERF745_AIO; Inav:FOXEERF745AIO |
| DJI connector | Supported, 8pin |
| Size | 32.5X32.5mm |
| Mounting holes | 25.5X25.5mm,Φ3mm/M2 |
| Weight | 8.6g |
| Working temperature | -20℃ ~ +55℃ |
| Working humidity | 20～95% |
| Storage temperature | -20℃ ~ +70℃ |
| Package contents | 1*AIO, Rubbers Columns, XT30 Cable, DJI Cable, Capacity |
| ESC firmware | G-H-30 BLS 16.7 |
| Continuous / burst current | 45A x 4/ 50A x 4 |
| ESC input voltage | 2~6S Lipo(8.4~25.2V) |
| Telemetry | No |
| ESC programming | BLHeli-S |
| Stick programming | Supported |
| Current sensor | Supported |
| Current scale | 100 |
| Input signal | Dshot300/600 |
