ChinaDroneRequest a quote →
FlashHobby M35DHW iron core servo with black housing and attached leadFlashHobby M35DHW iron core servo with black housing and attached lead

FlashHobby M35DHW

The Flash Hobby M35DHW is a digital standard iron core servo with steel gearing, dual ball bearings and a waterproof aluminum case. It operates at 4.8V–7.4V, offers selectable 180°±1 or 270°±1 limit angles, and incorporates a 300MM connector lead with a JR plug.

FlashHobbyDrone frame
Dimensions
40x20x40.50 mm
Weight
78 g
Operating voltage
4.8 V–7.4 V

Get a free quote

Product overview

The Flash Hobby M35DHW Iron Core Servo provides digital position control through a PWM interface with a 1500usec center point. Its construction combines an iron core motor, high precision steel gearing, dual ball bearings and an aluminum case. The waterproof servo measures 40x20x40.50mm and weighs 78g without the servo horn. Its connector lead is 300MM long and terminates in a JR plug, with 22AWG wiring and brown negative and red positive conductors.

The M35DHW operates over 4.8V–7.4V and temperatures from -20°C to +60°C. At 4.8V, standing torque is 24.9kg-cm and speed is 0.37sec/60°; at 6V, these figures are 30kg-cm and 0.3sec/60°; at 7.4V, they are 35.1kg-cm and 0.25sec/60°. Operating travel is 60° ±1, with selectable limit-angle configurations of 180°±1 or 270°±1. Cycle life exceeds 80000 cycles without load. The control electronics use MOS drive, a direct-drive potentiometer and a digital-control amplifier.

Propellers & airframes

Specifications

FlashHobby M35DHW specifications
SpecificationValue & conditions
Product identityFlash Hobby M35DHW Iron Core Servo
Servo typeDigital standard servo
MotorIron core motor
Gear constructionHigh precision steel gear
Case materialAluminum
BearingsDual ball bearing
Waterproof constructionWaterproof
Control systemPWM control; 1500usec center point
Operating voltage4.8V–7.4V
Operating temperature-20°C to +60°C
Cycle lifeGreater than 80000 cyclesWithout load.
Operating travel60° ±1
Limit angle180°±1 or 270°±1Selectable limit-angle configuration.
Pulse travel500–2500 psec
Drive typeMOS drive
Potentiometer typeDirect drive
Amplifier typeDigital control
Dimensions40x20x40.50mm
Weight78gWithout servo horn.
Standing torque24.9kg-cm; 30kg-cm; 35.1kg-cmAt test voltages of 4.8V, 6V and 7.4V, respectively.
Speed0.37sec/60°; 0.3sec/60°; 0.25sec/60°At test voltages of 4.8V, 6V and 7.4V, respectively.
Idle current270mA; 320mA; 360mAAt test voltages of 4.8V, 6V and 7.4V, respectively.
Running current1900mA; 2300mA; 2800mAAt test voltages of 4.8V, 6V and 7.4V, respectively.
Connector lead300MM lead with JR plug
Wire gauge22AWG
Negative wireBrown
Positive wireRed

Related guides