ChinaDroneRequest a quote →
FlashHobby M30DHW iron core servo with black housing, output shaft and connection wireFlashHobby M30DHW iron core servo with black housing, output shaft and connection wire

FlashHobby M30DHW

The FlashHobby M30DHW Iron Core Servo combines digital PWM control, precision steel gearing, dual ball bearings and a CNC aluminum housing. This waterproof standard servo operates at 4.8V–7.4V, offers selectable 180°±1 or 270°±1 limit angles, and has a 300MM connection lead with a JR plug.

FlashHobbyDrone frame
Dimensions
40x20x40.50 mm
Weight
78 g

Get a free quote

Product overview

The FlashHobby M30DHW Iron Core Servo is a digital standard servo with PWM control and a 1500usec center point. Its iron core motor drives precision steel gearing within a CNC aluminum housing and structure, supported by two ball bearings. The waterproof servo measures 40x20x40.50mm and weighs 78g without the servo horn. Its connection uses a 300MM lead with a JR plug and 22AWG wire, with brown negative and red positive conductors.

The M30DHW operates from 4.8V to 7.4V and across temperatures from -20°C to +60°C. Operating travel is 60° ±1, with selectable limit angles of 180°±1 or 270°±1. Standing torque is 22.3kg-cm at 5V and 26.6kg-cm at 6V. Travel speeds are 0.32sec/60° at 5V, 0.27sec/60° at 6V and 0.22sec/60° at 7V. Cycle life exceeds 80000 cycles without load.

Propellers & airframes

Specifications

FlashHobby M30DHW specifications
SpecificationValue & conditions
ProductFlashHobby M30DHW Iron Core Servo
Servo typeDigital standard servo
MotorIron core motor
Gear constructionHigh precision steel gear
Housing constructionCNC aluminum housing and structure
Ball bearings2BB
Waterproof constructionWaterproof
Control systemPWM control; 1500usec center point
Operating voltage range4.8V–7.4V
Operating temperature range-20°C to +60°C
Cycle lifeGreater than 80000 cyclesWithout load.
Operating travel60° ±1
Limit angle180°±1 or 270°±1Selectable limit-angle configuration.
Pulse travel500–2500 psec
Driver typeMOS drive
Potentiometer typeDirect drive
Amplifier typeDigital control
Dimensions40x20x40.50mm
Weight78gWithout servo horn.
Test voltage points5V; 6V; 7VTest voltages: 5V, 6V and 7V.
Standing torque22.3kg-cm; 26.6kg-cmAt 5V and 6V, respectively.
Speed0.32sec/60°; 0.27sec/60°; 0.22sec/60°At 5V, 6V and 7V, respectively.
Idle current270mA; 320mA; 360mAAt 5V, 6V and 7V, respectively.
Running current1900mA; 2300mA; 2800mAAt 5V, 6V and 7V, respectively.
Dead band width2 useeAt 5V, 6V and 7V.
Connector and wire length300MM wire with JR plug
Connector wire gauge22AWG
Wire polarityBrown: negative; red: positive

Related guides