ChinaDroneRequest a quote →
FlashHobby BLS3848MED brushless servo with black metal case and attached servo hornFlashHobby BLS3848MED brushless servo with black metal case and attached servo horn

FlashHobby BLS3848MED

The FlashHobby BLS3848MED 48KG BLS Servo is a programmable brushless digital servo with a 14-bit magnetic encoder, steel gears and a CNC AL6061 aluminum case. Operating on 6.0 ~ 8.4 Volts DC, it supports Sanwa SSR, NB4 and Futaba modes and provides adjustable control functions, including endpoints, fail-safe and soft start.

FlashHobbyDrone frame
Dimensions
40x20x38.00 mm
Weight
80 g
Operating voltage
6.0 ~ 8.4 Volts DC

Get a free quote

Product overview

The FlashHobby BLS3848MED combines a brushless motor, steel gears and a 32-bit MCU with a 14-bit magnetic encoder for programmable digital servo control. Its PWM digital amplifier supports endpoint and direction adjustments, fail-safe, dead band, slower speed settings, soft start rate and overload protection. Data save/load and program reset functions support configuration management. The servo operates on 6.0 ~ 8.4 Volts DC and supports Sanwa SSR, NB4 and Futaba modes. A 300MM connector wire terminates in a JR plug.

The CNC AL6061 aluminum case incorporates a diamond-cut aluminum heat sink shell and is water-resistant and waterproof. A pair of ball bearings supports the output shaft, which has a 25-tooth spline. The servo measures 40x20x38.00mm and weighs 80g without the servo horn. At 6.0V, operating speed is 0.13sec/60° with 36.0kg-cm/500 oz-in stall torque; at 7.4V, these figures are 0.10sec/60° and 42.0kg-cm/583 oz-in. At 8.4V, it delivers 0.09sec/60° operating speed and 48.0kg-cm/666 oz-in stall torque.

Propellers & airframes

Specifications

FlashHobby BLS3848MED specifications
SpecificationValue & conditions
ProductFlashHobby BLS3848MED 48KG BLS Servo
Dimensions40x20x38.00mm
Weight80gWithout servo horn.
GearsSteel gears
Operating speed at 6.0V0.13sec/60°At 6.0V.
Operating speed at 7.4V0.10sec/60°At 7.4V.
Operating speed at 8.4V0.09sec/60°At 8.4V.
Stall torque at 6.0V36.0kg-cm/500 oz-inAt 6.0V.
Stall torque at 7.4V42.0kg-cm/583 oz-inAt 7.4V.
Stall torque at 8.4V48.0kg-cm/666 oz-inAt 8.4V.
Motor typeBrushless motor
Signal typeDigital control
Case materialCNC AL6061 aluminum case
Connector wire300MM wire with JR plug
AmplifierProgrammable PWM digital amplifier
Processor and encoder32-bit MCU with 14-bit magnetic encoder
Operating voltage6.0 ~ 8.4 Volts DC
Output shaft supportDual ball bearing supported output shaft
Output spline25-tooth output spline
Heat sink shellDiamond-cut aluminum heat sink shell
Case protectionWater-resistant and waterproof case
Compatible modesSanwa SSR, NB4 and Futaba modes
Programmable endpoint and direction settingsEndpoint adjustments and direction
Programmable fail-safe and dead bandFail-safe and dead band
Programmable speedSpeed adjustment to slower operation
Programmable soft startSoft start rate
Programmable overload protectionOverload protection
Programming data managementData save/load and program reset

Related guides