ChinaDrone.Request a quote ↗
COMPONENT

EFY Unihangar S1

By EFY ↗

The EFY Unihangar S1 is an unattended UAV hangar for scheduled patrols, combining protected outdoor storage, automatic charging and aircraft scheduling. Its sliding roof exposes a top-mounted landing pad with centring bars. The IP54 cabinet uses 220VAC power with UPS backup; weather station support and an RTK base station are optional.

Request a quote ↗
EFY Unihangar S1 UAV hangar with a gray cabinet and orange trim
EFY Unihangar S1 UAV hangar with a gray cabinet and orange trim
Manufacturer and modelEFY Unihangar S1
Product type and purposeUnattended UAV hangar for scheduled patrol cycles without an on-site crew.
Closed dimensions2.3m×2.3m×2mCeiling closed.
Opened dimensions4m×2.3m×2mCeiling opened.
Protection gradeIP54
Power supply220VAC

Product overview

The EFY Unihangar S1 provides an unattended base for UAV patrol operations, combining outdoor aircraft storage and protection with automatic charging. Its cabinet measures 2.3m×2.3m×2m with the ceiling closed and has an IP54 protection rating. Two sliding roof halves open the structure to 4m×2.3m×2m for take-off and landing. The aircraft uses a landing pad on top of the hangar, with centring bars that align it after landing before it rests inside between flights.

The electrical configuration combines a 220VAC supply, UPS backup and a maximum power of 300W; charging time is 1 hour. Integrated sensing supports environmental awareness, meteorological sensing and real-time aircraft scheduling for unattended patrol cycles. Weather station support and an RTK base station are optional equipment choices. The hangar supports different UAV platforms, while additional Unihangars can extend the network’s range. Its physical integration footprint therefore depends on whether the roof is closed or opened for flight operations.

Specifications

SpecificationValue & conditions
Manufacturer and modelEFY Unihangar S1
Product type and purposeUnattended UAV hangar for scheduled patrol cycles without an on-site crew.
Closed dimensions2.3m×2.3m×2mCeiling closed.
Opened dimensions4m×2.3m×2mCeiling opened.
Protection gradeIP54
Power supply220VAC
Backup powerUPS
Maximum power300W
Weather station supportOptionalOptional equipment.
RTK base stationOptionalOptional equipment.
Charging time1 hour
Roof architectureTwo roof halves slide apart for take-off and landing.
Landing pad locationTop-mounted take-off and landing pad.
Aircraft centringCentring bars align the drone on the pad.After landing.
Outdoor storageAutomatic outdoor UAV storage and protection.
Automatic chargingAutomatic UAV charging.
Meteorological sensing and schedulingIntegrated meteorological sensor and real-time aircraft scheduling.
Environmental sensingIntegrated sensors automatically sense environmental conditions.
Network expansionNetwork range can be extended by adding more Unihangars.Additional Unihangars.
UAV platform compatibilitySupports different UAV platforms.
SOURCE WITH CHINADRONE

Request a quote for EFY Unihangar S1

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
HOBBYWING UBEC 10A (2-6S) regulator with attached wires and switch
Batteries & charging

HOBBYWING UBEC 10A (2-6S)

By HOBBYWING

The HOBBYWING UBEC 10A (2-6S) is an external switching-mode DC-DC regulator for powering receivers and other electronics from a 2-6S LiPo battery. Intended particularly for large helicopters and fixed-wing aircraft, it offers four adjustable output voltages, a 10A continuous rating and a weight of 36g.