ChinaDroneRequest a quote →

Cuilu Tance CATEM-1

The Cuilu Tance CATEM-1 is a combined-source ground–air transient electromagnetic system pairing a ground transmitter with a UAV-carried receiver. Electric and magnetic excitation, GPS synchronization and RTK positioning support geological and engineering surveys. Three-component and single-component reception, automated three-dimensional flight planning and a portable folding transmitting coil support field deployment.

Cuilu TancePayloads & thermal cameras
Product type
CATEM-1 combined-source ground–air transient electromagnetic system, with a ground-based transmitter and a UAV-carried airborne receiver.

Get a free quote

Product overview

The Cuilu Tance CATEM-1 combines ground-based excitation with airborne reception for geological and engineering investigations. A shared main unit supports electric and magnetic sources, while three independent electric-source outputs provide configurable timing. Reception is available in three-component and single-component modes, and magnetic excitation supports large and small transmitting loops. Applications include detailed transient electromagnetic surveys, anisotropy investigation, induced polarization, dam leakage detection and deeply buried pipe and culvert detection. Electric-source operation addresses deep geological structures within 600m.

The lightweight system incorporates flight attitude correction, real-time coordinate reporting and remote wireless data transmission. The transmitter weighs less than 50kg and the receiver weighs less than 5kg; the supplied portable folding transmitting coil unfolds on site. Multirotor flight planning software generates three-dimensional routes from terrain information and waypoint coordinates while accounting for payload clearance, working height and flight speed. RTK positioning supports point, continuous and suspended lowering measurements. Cloud management and parallel inversion support data handling and collaboration, with displays for transmitter current, operating status and induced-voltage signals.

Mission payloads

Specifications

Cuilu Tance CATEM-1 specifications
SpecificationValue & conditions
Product typeCATEM-1 combined-source ground–air transient electromagnetic system, with a ground-based transmitter and a UAV-carried airborne receiver.
Excitation and positioningCombined electric or magnetic source excitation, GPS synchronization and RTK differential positioning.
ApplicationsDetailed transient electromagnetic surveys, anisotropy investigation, induced polarization, dam leakage detection, deeply buried pipe and culvert detection, and ground transient electromagnetic surveys.
Shared transmitterOne main unit supports both electric and magnetic source excitation.
Transmitter turn-offConstant-voltage-clamped, high-speed linear turn-off reduces the shallow blind zone.
Electric-source outputs3 independent electric combined-source outputs with configurable timing.
Maximum output power40kWElectric-source operation.
Maximum transmission voltage≥ 1000VElectric-source operation.
Transmission frequencyAdjustable from 1Hz~64Hz.
Investigation depthWithin 600m.Electric-source investigation of deep geological structures.
Transmitter weightLess than 50kg
Receiver channels3
A/D conversion resolution32 bits
Sampling rate≥ 200kHz
Dynamic gain≥ 100dB
Local storage capacity≥ 16G
Total receiver weightLess than 5kg
Effective receiving area≥ 100m²Three-component receiving coil; per individual coil.
Receiving bandwidth≥ 40kHzThree-component receiving coil.
Receiving bandwidth≥ 10kHzSingle-component receiving coil.
Receiving modesThree-component and single-component reception.
Transmitting loop supportSupports large-loop and small-loop coils.Magnetic-source operation.
Supplied transmitting coilPortable folding transmitting coil that can be transported and unfolded on site.
Hardware functionsFlight attitude correction, real-time high-precision coordinate reporting, precise transmitter–receiver synchronization and remote wireless data transmission.
Observation modesRTK automatic positioning with low-altitude point measurements, continuous measurements and suspended lowering measurements.
Flight planning softwareMultirotor transient electromagnetic flight planning software automatically generates three-dimensional routes.Route generation uses terrain imagery, elevation files, user-defined waypoint coordinates, payload safety radius, working height and flight speed.
Cloud data processingCloud platform management and parallel inversion support data management and team collaboration.
Data visualizationOnline transmitter current display and status monitoring, induced-voltage waveform display and extracted-channel display.

Related guides