ChinaDrone.Request a quote ↗
COMPONENT

ComNav AT160 Helix Antenna

By ComNav ↗

The ComNav AT160 Helix Antenna is a compact GNSS antenna component for UAV and other positioning integrations. It combines multi-constellation, triple-frequency reception with a low-noise amplifier and SMA male connector. Procurement review should confirm receiver integration, electrical requirements, installation allowances and supplied accessories against the selected configuration.

Request a quote ↗
ComNav AT160 Helix Antenna with black cylindrical housing and visible connector.
ComNav AT160 Helix Antenna with black cylindrical housing and visible connector.
ComNav AT160 Helix Antenna with a black cylindrical housing and gold-colored connector.
ComNav AT160 Helix Antenna with a black cylindrical housing and gold-colored connector.
Product type and applicationTriple-frequency GNSS helix antenna for positioning applications including UAVs, UGVs and robotics
GPSL1, L2, L5
GLONASSL1, L2
BeiDouB1, B2, B3
BeiDou GlobalB1C, B2a
GalileoE1, E5a, E5b

Product overview

The ComNav AT160 Helix Antenna is a GNSS reception component intended for positioning systems in UAVs, UGVs and robotics, with GIS and RTK applications also identified. Its physical architecture combines a helix antenna with a low-noise amplifier and an SMA male connection. The published envelope is Φ27.5×58 mm, with a table weight limit of ≤ 30g; these manufacturer values should be confirmed for the selected configuration when allocating installation space and mass. An antenna component rather than a flight platform or airframe kit.

Integration planning should account for the published 50Ω nominal impedance, RHCP polarization, 3 - 12 VDC supply and ≤ 42mA operating current, subject to confirmation of the selected configuration. Supported GNSS bands, SBAS and L-Band. Published environmental limits include IP67 protection and 95% non-condensing humidity. Gain, noise and phase-center statements describe manufacturer specifications or claims; no test procedure establishing complete-system positioning accuracy.

Specifications

SpecificationValue & conditions
Product type and applicationTriple-frequency GNSS helix antenna for positioning applications including UAVs, UGVs and robotics
GPSL1, L2, L5
GLONASSL1, L2
BeiDouB1, B2, B3
BeiDou GlobalB1C, B2a
GalileoE1, E5a, E5b
Additional signal supportSBAS and L-Band
Nominal impedance50Ω
PolarizationRHCP
Axial ratio (90°)≤ 3dBSpecified at 90°.
LNA gain33±2dB
Noise figure≤ 1.8dB
Output VSWR≤ 1.8
Operating voltage3 - 12 VDC
Operating current≤ 42mA
Gain at zenith3dBiGain specified at zenith.
DimensionsΦ27.5×58 mm
ConnectorSMA male connector
Weight≤ 30gParameter table specifies ≤ 30g; descriptive text says under 30g.
Operating temperature-40°C to +70°COperating temperature range.
Storage temperature-55°C to +85°CStorage temperature range.
Humidity95% non-condensingNon-condensing humidity condition.
Water and dust protectionIP67
Phase center errorSub-millimeter level; manufacturer claims stability and repeatabilityManufacturer claim.
SOURCE WITH CHINADRONE

Request a quote for ComNav AT160 Helix Antenna

Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.

Submit your procurement requirements ↗

No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.

KEEP EXPLORING

Similar products

Browse all products ↗
CUAV V5+ flight controller with silver housing and black connector base.
Flight control & navigation

CUAV V5+ flight controller

By CUAV

The CUAV V5+ flight controller provides power, actuator, receiver, GPS and telemetry connections for vehicle integration. Its documented kit includes a power module, safety switch, SBUS cable and factory-installed SD card. Procurement must account for mounting orientation, peripheral selection and wiring requirements.

Flight control & navigation

BW-320A

By Wuxi Beiwei Sensing Technology

The Beiwei Sensing BW-320A is a digital closed-loop, single-axis fiber-optic gyroscope for navigation, payload attitude determination, and positioning and orientation systems. Its solid-state package has no rotating parts, measures ≤59.6mm×59.6mm×26.3mm and weighs ≤150g. It requires +5VDC and provides a customizable RS422 interface.

DJI WooKong-H flight control system with rectangular modules and a round white module
Flight control & navigation

WooKong-H

By DJI

DJI WooKong-H is a flight control system. Its documentation set includes a version 1.8 user manual and release notes, both dated June 21, 2012. Both documents are provided in PDF format as references for the system.