ChinaDroneRequest a quote →

[Combo] 2 Packs CNHL MiniStar 1500mAh 14.8V 4S Lipo Battery 120C with XT60 Plug

The CNHL MiniStar 1500mAh 14.8V 4S 120C LiPo battery combo includes two packs for FPV drones. Each 4S1P pack combines an XT60 output plug, JST / XH balance connector and 12# AWG wire, with discharge ratings of 120C continuous and 240C burst.

CNHLDrone battery
Capacity
1500 mAh
Voltage
14.8 V
Continuous discharge rate
120C
Size
39X27X79 mm

Get a free quote

Product overview

The CNHL MiniStar 1500mAh 14.8V 4S 120C LiPo battery combo supplies two packs with XT60 output plugs for FPV drone applications. Each battery uses a four-cell, 4S1P configuration and provides a 120C continuous discharge rating with a 240C burst rating. Applications include FPV models such as the Skylark m4-fpv250, MiniShredder 200, QAV250 and Vortex 285. Installation requires matching voltage, dimensions and plug.

Each pack measures 39 × 27 × 79mm, with a stated dimensional difference of 1–5mm, and weighs approximately 162g with a ±5g tolerance. Connections comprise an XT60 output connector, a JST / XH balance connector and 12# AWG wire. The maximum charge rate is 5C. Charging must stop immediately when cell voltage reaches 4.2V; the normal cell voltage range is 3.7V–4.2V.

Batteries & charging

Specifications

[Combo] 2 Packs CNHL MiniStar 1500mAh 14.8V 4S Lipo Battery 120C with XT60 Plug specifications
SpecificationValue & conditions
ProductCNHL MiniStar 1500mAh 14.8V 4S 120C LiPo battery
Supplied quantity2 battery packs with XT60 plugs
Stock number1501204
Capacity1500mAh
Voltage14.8V
Cell configuration4-Cell / 4S1P
Continuous discharge rate120CContinuous discharge.
Burst discharge rate240CBurst discharge.
Maximum charge rate5C Max
Size39X27X79mm1–5mm difference.
Approximate weightApproximately 162g±5g.
Output connectorXT60
Balance connectorJST / XH
Wire gauge12# AWG
Compatible RC modelsFPV drones including Skylark m4-fpv250, MiniShredder 200, Qav250, Vortex, QAV250, Danaus and Vortex 285Matching voltage, dimensions and plug.
Fit requirementsVoltage, dimensions and plug must match.Installation in an RC model.
Cell charging cutoffStop charging immediately at 4.2V per cell.During charging.
Normal cell voltage3.7V~4.2V

Related guides