Product overview
The BrotherHobby SE 4215 480KV Motor(CW) is a propulsion motor for integration into a drone build. Its 12N14P configuration combines a stator made from 0.2mm Kawasaki silicon steel with N52H arc rotor magnets. Both the base casing and bell cap use Al 7075, while the shaft uses SUS420. The specified motor weight is 225g. This is a motor component, with a CW designation, rather than a complete flight platform or an airframe kit.
Mechanical integration centers on the M4 mounting bolt pattern at 30X30mm and the M6 propeller adapter shaft thread. The bearing specification is Φ16*Φ8*5. Electrical integration uses the specified 8S LiPo configuration and 16# wiring with a 750mm length. These mounting, shaft and wiring details define the interfaces to accommodate when selecting the surrounding propulsion hardware. The 480KV rating identifies this particular motor configuration; the battery specification is specifically for an 8S LiPo arrangement.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby SE 4215 480KV Motor(CW) |
| KV rating | 480KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M6 |
| Shaft material | SUS420 |
| Battery cell count | 8SLiPo battery configuration. |
| Mounting bolt pattern | M4 (30X30mm) |
| Bearings | Φ16*Φ8*5 |
| Rotor magnets | N52H arc magnets |
| Weight | 225g |
| Wire gauge and length | 16#; 750mm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby SE 4215 480KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
