Product overview
The BrotherHobby SE 2816 810KV Motor(CW) is a propulsion component in the SE series of FPV drone motors. Its physical construction combines an Al 7075 base casing and bell cap with a SUS420 shaft. Internally, the motor uses a 12N14P configuration, a stator made from 0.2mm Kawasaki silicon steel, and N52H arc magnets in the rotor. Japanese NMB bearings are specified as 12X6X4, and the motor has a stated weight of 98.5g.
For installation, the motor provides an M3 bolt pattern with 19X19mm spacing and an M5 propeller adapter shaft thread. These interfaces define the mounting and propeller attachment requirements for integration into a drone. Electrical connections use 18# wire with a length of 25cm, and the specified battery configuration is 6S LiPo. The named CW model carries an 810KV specification; the selectable KV values also include 750. Procurement should therefore distinguish the named 810KV configuration from that additional selection.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby SE 2816 810KV Motor(CW) |
| Motor category | SE series FPV drone motor |
| Selectable KV values | 810 750 |
| Specified KV | 810KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Battery cell count | 6SLiPo battery. |
| Bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor | N52H arc magnets |
| Weight | 98.5g |
| Wire | 18# 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby SE 2816 810KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
