Product overview
The BrotherHobby SE 2810 1180KV Motor(CW) is an SE series motor for FPV drone propulsion, supplied as a motor component for integration into an aircraft. Its specified configuration combines a 1180KV rating with a 6S LiPo battery configuration. The motor uses a 12N14P architecture, a stator made from 0.2mm Kawasaki silicon steel, and N52H arc magnets in the rotor. Both the base casing and bell cap use Al 7075, while the shaft material is SUS420.
Mechanical integration centers on an M3 mounting pattern measuring 19X19mm and an M5 propeller adapter shaft thread. Japanese NMB 12X6X4 bearings form part of the assembly, and the motor weighs 67.2g. Its electrical leads are 18 AWG and 25cm long, providing a defined lead length for installation planning. KV selections include 1180 and 1350; the detailed motor specification identifies 1180KV. These mounting, wiring and battery requirements are the concrete integration parameters for the specified motor.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | BrotherHobby SE 2810 1180KV Motor(CW) |
| Product type | SE series FPV drone motor |
| KV selections | 1180; 1350 |
| Motor KV | 1180KVSpecified 1180KV configuration. |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Battery cell count | 6SLiPo battery configuration. |
| Bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor magnets | N52H arc magnets |
| Weight | 67.2g |
| Wire | 18 AWG; 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby SE 2810 1180KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
