Product overview
The BrotherHobby SE 2807 1300KV Motor(CW) is an SE series propulsion component for FPV drones. Its base casing and bell cap use Al 7075, while the shaft material is SUS420. The internal architecture combines a 12N14P configuration with a stator made from 0.2mm Kawasaki silicon steel and a rotor using N52H arc magnets. Japanese NMB bearings are specified at 12X6X4. The motor weighs 48g, establishing its component weight for integration into a drone assembly.
This CW model has a 1300KV rating and a specified battery configuration of 6S LiPo. Its mechanical interfaces comprise an M3 bolt pattern with 19X19mm spacing and an M5 propeller adapter shaft thread. Wiring is specified as 18# AWG with a 20cm length. Together, the mounting pattern, propeller attachment thread and wiring dimensions describe the motor’s physical integration interfaces, while the 6S LiPo specification defines the stated battery configuration for this FPV propulsion component.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | BrotherHobby SE 2807 1300KV Motor(CW) |
| Product type | SE series FPV drone motor |
| KV | 1300KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS420 |
| Battery cell count | 6SLiPo battery. |
| Bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor | N52H arc magnets |
| Weight | 48g |
| Wire gauge and length | 18# AWG, 20cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby SE 2807 1300KV Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
