Product overview
The BrotherHobby LA 2005 Motor is a propulsion component for FPV drone builds. Its construction combines an Al 7075 base casing and bell cap with a SUS 420 shaft. Internally, the motor uses a 12N14P configuration, a stator made from 0.15mm Nippon Steel silicon steel, and N52H arc magnets in the rotor. Japanese NMB bearings measure 7x3x3mm. The available KV selections are 1450, 2450, 2800 and 3450, providing four motor variants for selection.
Mechanical integration centers on an M2 bolt pattern measuring 12X12mm and an M5 propeller adapter shaft thread. These dimensions define the mounting and propeller attachment interfaces to accommodate in a build. The motor is specified for 4-6S LiPo batteries and has 24AWG wires measuring 16cm in length. Its stated weight is 21.01g with 16cm SR wires, so that figure includes the leads. The product is an individual motor component rather than a flight platform or airframe kit.
Specifications
| Specification | Value & conditions |
|---|---|
| KV options | 1450, 2450, 2800, 3450 |
| Base casing | Al 7075 |
| Stator | 0.15mm Nippon Steel silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft material | SUS 420 |
| Cell count | 4-6SLiPo battery. |
| Bolt pattern | M2 (12X12mm) |
| Bearings | Japanese NMB 7x3x3mm |
| Rotor magnets | N52H arc magnets |
| Weight | 21.01gWith 16cm SR wires. |
| Wire gauge and length | 24AWG, 16cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby LA 2005 Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
