Product overview
The BrotherHobby Avenger 2812 V2 Motor(CW) is a motor component for FPV drone propulsion. Its physical construction combines an Al 7075 base casing and bell cap with a hollow titanium alloy shaft. Internally, the 12N14P configuration uses a stator made from 0.2mm Kawasaki silicon steel and a rotor with N52H arc magnets. Japanese NMB bearings are specified as 12X6X4. The motor comes in three KV options: 900KV, 960KV and 1115KV.
The motor’s mechanical interfaces comprise an M3 mounting bolt pattern of 19X19mm and an M5 propeller adapter shaft thread. Its specified battery cell-count range is 5-8S LiPo. The wiring is 18AWG with a 25cm length, while the stated weight is 78g with 25cm SR wires. That weight therefore describes the motor with those wires included. The supplied hardware is a motor component, rather than a complete flight platform or an airframe kit.
Specifications
| Specification | Value & conditions |
|---|---|
| Manufacturer and model | BrotherHobby Avenger 2812 V2 Motor(CW) |
| KV options | 900KV/960KV/1115KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Battery cell count | 5-8SLiPo battery configuration. |
| Mounting bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor | N52H arc magnets |
| Weight | 78gWith 25cm SR wires. |
| Wire gauge and length | 18AWG, 25cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 2812 V2 Motor(CW)
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
