Product overview
The BrotherHobby Avenger 2806.5 Motor is an FPV drone propulsion component offered in four winding-speed options: 1300KV, 1460KV, 1700KV and 1920KV. Its construction combines a 12N14P configuration with a 0.2mm Kawasaki silicon steel stator and N52H arc rotor magnets. Al 7075 is used for both the base casing and bell cap, while the shaft has a hollow titanium alloy construction. The bearing specification is Japanese NMB 12X6X4. These materials and components describe the motor’s physical assembly.
For installation, the motor has an M3 bolt pattern measuring 19X19mm and an M5 propeller adapter shaft thread. Its electrical specification supports a 4-6S LiPo battery configuration, and the wiring is 18AWG with a length of 20cm. Motor weight is 41g with short SR wires, so that mass applies specifically to the stated short-wire configuration. The four KV ratings are the selectable motor variants; the mounting pattern, shaft thread and battery cell range are fixed specifications.
Specifications
| Specification | Value & conditions |
|---|---|
| Product | BrotherHobby Avenger 2806.5 Motor |
| KV options | 1300KV / 1460KV / 1700KV / 1920KV |
| Base casing | Al 7075 |
| Stator | 0.2mm Kawasaki silicon steel |
| Motor configuration | 12N14P |
| Propeller adapter shaft thread | M5 |
| Shaft | Titanium alloy hollow shaft |
| Battery cell count | 4-6SLiPo battery. |
| Bolt pattern | M3 (19X19mm) |
| Bearings | Japanese NMB 12X6X4 |
| Rotor magnets | N52H arc magnets |
| Weight | 41gWith short SR wires. |
| Wire gauge and length | 18AWG, 20cm length |
| Bell cap | Al 7075 |
Request a quote for BrotherHobby Avenger 2806.5 Motor
Send your application, destination country and expected quantity to the ChinaDrone team. We can discuss product selection, configuration and sourcing from China.
Submit your procurement requirements ↗No account needed. A model number is optional. Your enquiry is handled by ChinaDrone.
