ChinaDroneRequest a quote →

Beitian BT-920HB

The Beitian BT-920HB is an RTK receiver for high-precision differential GNSS positioning and deformation monitoring. It combines an RTK GNSS module, antenna and inertial sensors in a Φ140*59.5mm unit with a GX12-4 connector, RS-232 communication and support for multiple satellite constellations.

BeitianDrone flight controller
Supply voltage
DC 3.6 V-6.0 V
Weight
≤550g
Dimensions
Φ140*59.5 mm

Get a free quote

Product overview

The Beitian BT-920HB combines an RTK GNSS module with antenna and inertial sensing capabilities for high-precision differential positioning and deformation monitoring. Its signal coverage spans GPS, BDS-2, BDS-3, GLONASS, Galileo, QZSS and SBAS, with starred signal options varying by version. Standard single-point positioning accuracy is H ≤ 1.5m and V ≤ 3m, while PPP accuracy is 0.1m horizontally and 0.2m vertically. Velocity accuracy is 0.02m/s, and assisted dead reckoning error is 3% of the distance travelled.

Measuring Φ140*59.5mm and weighing ≤550g, the receiver uses a GX12-4 aviation connector and RS-232 signal levels. It operates from DC 3.6V-6.0V, with a typical supply of 5.0V, across an operating temperature range of -40°C to +85°C. The antenna has right-hand circular polarization, 5.5dBi gain and a phase center error of ±2mm. A red power indicator shows power input, while the rover’s blue RTK indicator stays illuminated in RTK Fixed mode; the RTK indicator remains off during base-station operation.

Flight control & navigation

Specifications

Beitian BT-920HB specifications
SpecificationValue & conditions
Product identityBeitian BT-920HB RTK receiver
GNSS signals
  • GPS: L1C/A, L2P, L2C, L5, L1C;
  • BDS-2: B1I, B2I, B3I;
  • BDS-3: B1I, B1C, B2a, B2b, B3I;
  • GLONASS: G1, G2, G3*;
  • Galileo: E1, E5b, E5a, E5 AltBoC*, E6c*;
  • QZSS: L1C/A, L2C, L5, L1C;
  • SBAS: L1C/A, L5;
  • IRNSS*: L5
Starred signals vary with version.
Tracking sensitivity-155dBm
Acquisition sensitivity-140dBm
Carrier phase accuracy1mm
Positioning accuracyH ≤ 1.5m, V ≤ 3mStandard single-point positioning.
Velocity accuracy0.02m/s
Assisted dead reckoning error3%dD is the distance travelled.
PPP accuracyHorizontal: 0.1m; vertical: 0.2mPPP positioning.
Initialization confidence99.9 %RTK initialization.
RTK accuracyH: ± (8+ 10⁻⁶ × D) mm; V: ± (15+ 10⁻⁶ × D) mmD is the baseline length in km.
RTK data rateMax 50HzDefault 5Hz; optionally configurable up to 50Hz.
ComNav Binary formatComNav Binary (CNB)
CMR messagesCMROBS, CMRREFGPS.
RTCM2.X messagesRTCM1, RTCM3, RTCM9, RTCM1819, RTCM31, RTCM41, RTCM42
Output signal levelRS-232
Static differential accuracyH: ±(2.5+1×10⁻⁶×D) mm; V: ±(5.0+1×10⁻⁶×D) mmCompass Solution software support; D is the baseline distance in km.
Angular rate range±125°/sGyroscope.
Bias repeatability0.5°/sGyroscope.
Bias stability5°/hGyroscope.
Angle random walk0.12°/sqrt(h)Gyroscope.
Acceleration range±2gAccelerometer.
DimensionsΦ140*59.5mm
ConnectorGX12-4 aviation connector
Supply voltageDC 3.6V-6.0VTypical supply: 5.0V.
Weight≤550g
Temperature range-40°C to +85°COperating.
Receiver moduleRTK GNSS module
Antenna characteristicsGain: 5.5dBi; axial ratio: ≤3.0dB; phase center error: ±2mm; right-hand circular polarization; port impedance: 50Ω
Status indicatorsPWR: steady red with power input. Rover RTK: off outside RTK mode, steady blue in RTK Fixed mode. Base station RTK: always off.PWR indicates power input. RTK indication applies to rover operation; the RTK light stays off in all base-station states.

Related guides