ChinaDroneRequest a quote →

Beitian BQD-54D

The Beitian BQD-54D is a GNSS receiver operating in BDS mode, with an AT6668B chip and RS-232 NMEA output. It combines positioning, speed and timing outputs with configuration memory in a 60 × 40 × 15mm unit featuring a 2m cable, DB9 female serial connector and magnetic mounting.

BeitianDrone flight controller
Supply voltage
DC 3.6 V–5.5 V; typical 5.0 V
Weight
72.0 g
Dimensions
60 mm × 40 mm × 15 mm

Get a free quote

Product overview

The Beitian BQD-54D GNSS receiver uses an AT6668B chip and operates in BDS mode on BDS-B1I and BDS-B1C frequencies. It provides horizontal accuracy of less than 2m at CEP50, speed accuracy of less than 0.1m/s at 1σ and 1PPS timing accuracy of 20ns. Cold-start time is ≤23s; hot start and reacquisition each take ≤1s. Its serial interface delivers NMEA output at 115200bps using RS-232 signal levels. Supported sentences are RMC, VTG, GGA, GSA, GSV, GLL, ZDA and TXT, with an update frequency of ≤10Hz and a default of 1Hz.

The receiver measures 60 × 40 × 15mm and weighs 72.0g. It has a 2m cable, a DB9 female serial connector and a bottom-mounted magnet for attachment. Built-in FLASH retains configuration changes after power loss. The pulse output has a default period of 1s and a high-level duration of 100ms. Power input is DC 3.6–5.5V, typically 5.0V, with current consumption of 35mA at 5.0V. The operating temperature range is -40°C to +85°C, and the storage temperature range is -40°C to +90°C.

Flight control & navigation

Specifications

Beitian BQD-54D specifications
SpecificationValue & conditions
Product typeBQD-54D GNSS receiver
BrandBeitian
ChipAT6668B
FrequenciesBDS-B1I, BDS-B1C
Operating modeBDS
Horizontal accuracyLess than 2mCEP50
Speed accuracyLess than 0.1m/s1σ
Timing accuracy20ns1PPS
Cold-start time≤23sCold start
Hot-start time≤1sHot start
Reacquisition time≤1sReacquisition
Baud rate115200bps
Output signal levelRS-232
Output protocolNMEA
NMEA sentencesRMC, VTG, GGA, GSA, GSV, GLL, ZDA, TXT
Update frequency≤10Hz; default 1Hz
Configuration memoryBuilt-in FLASH allows configuration changes and retains settings after power loss.
Pulse outputDefault period 1s; high-level duration 100ms
Supply voltageDC 3.6V–5.5V; typical 5.0V
Current consumption35mAAt 5.0V
Dimensions60mm × 40mm × 15mm
Weight72.0g
ConnectorDB9 female serial connector
Cable length2m
MountingMagnetic attachment using a bottom-mounted magnet
Operating temperature-40°C to +85°C
Storage temperature-40°C to +90°C

Related guides