ChinaDroneRequest a quote →

Beitian BD-8953DU

The Beitian BD-8953DU is a GNSS receiver for multi-system positioning, with RS-232 data output and USB power connection. Built around an M8030-KT chip, it provides 72 search channels, configurable positioning modes and retained configuration memory. A magnetic base and 3 m cable support installation.

BeitianDrone flight controller
Supply voltage
DC 3.6 V–5.5 V
Weight
1.5 kg
Dimensions
Φ160 × 157 mm

Get a free quote

Product overview

The Beitian BD-8953DU uses an M8030-KT chip with 72 search channels and supports GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1 and QZSS L1. Its default positioning mode combines GPS, BDS, SBAS and QZSS. For higher accuracy requirements, it offers recommended combinations adding GALILEO alongside either GPS and GLONASS or GPS and BDS, with SBAS and QZSS. Horizontal accuracy is 2.0 m CEP 2D RMS with SBAS assistance under open sky; velocity accuracy is 0.1 m/s at 95% with SA off.

The receiver measures Φ160 × 157mm, weighs 1500 g and incorporates magnets in its base for attachment. Its 3 m cable has a DB9 female serial connector and a USB connector for power. RS-232 output carries NMEA-0183 sentences at an update frequency of 1Hz–10Hz, defaulting to 1Hz. The 4M FLASH retains configuration changes after power loss. Supply voltage is DC 3.6V–5.5V, typically 5.0V, with normal consumption of 50 mA at 5.0V. Operating temperature is -40°C to +85°C, with operating limits below 50,000m altitude, 515m/s speed and 4g acceleration.

Flight control & navigation

Specifications

Beitian BD-8953DU specifications
SpecificationValue & conditions
ProductBeitian BD-8953DU GNSS receiver
ChipM8030-KT
Supported frequenciesGPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1
Positioning systemsGPS, GLONASS, BDS, GALILEO, SBAS and QZSS
Combined positioning modeGPS+BDS+SBAS+QZSSDefault configuration.
Recommended combined positioning modesGPS+GLONASS+SBAS+QZSS+GALILEO or GPS+BDS+SBAS+QZSS+GALILEOFor higher accuracy requirements.
Channels72 search channels
Horizontal accuracy2.0 m CEP 2D RMSSBAS assistance; open sky.
Velocity accuracy0.1 m/s95%; SA off.
Time accuracy1us
Warm-start time25 sWarm start.
Hot-start time1 sHot start.
Output signal levelRS-232
Output protocolNMEA-0183
NMEA sentencesRMC, VTG, GGA, GSA, GSV, GLL
Update frequency1Hz–10HzDefault: 1Hz.
Configuration memory4M FLASH; configuration can be changed and is retained after power loss
AltitudeLess than 50,000mOperating limit.
SpeedLess than 515m/sOperating limit.
AccelerationLess than 4gOperating limit.
Supply voltageDC 3.6V–5.5VTypical voltage: 5.0V.
Current consumption50 mANormal operation at 5.0V.
DimensionsΦ160 × 157mm
Weight1500 g
ConnectorsDB9 female serial connector and USB connector for power
Cable length3 m
MountingMagnetic attachment using magnets in the base
Operating temperature-40°C to +85°C

Related guides