ChinaDrone.Request a quote ↗
COMPONENT

Boslipo S8 Version 1605mAh 160C 6S FPV Battery

By Shenzhen BBR New Energy Technology Inc ↗

The Boslipo S8 Version 1605mAh 160C 6S FPV Battery provides a 1605mAh, 160C pack in a 6S1P, 22.2V configuration with an XT60 plug. Its handling requirements include attended charging, a 4.2V per-cell charge ceiling, post-discharge rest, and specified storage voltage and temperature.

Get a free sourcing quote for Boslipo S8 Version 1605mAh 160C 6S FPV Battery

Get a free quote

ProductBoslipo S8 Version 1605mAh 160C 6S FPV Battery
Capacity1605mAh
C rating160C
Cell configuration6S1P
Pack voltage22.2V
Power connectorXT60 plug

Product overview

The Boslipo S8 Version 1605mAh 160C 6S FPV Battery is an FPV battery supplied with 1605mAh capacity, a 160C rating, a 6S1P cell configuration, 22.2V pack voltage and an XT60 plug. Each cell has a nominal voltage of 3.7V and must not exceed 4.2V during charging. Charging must remain attended, and the battery must rest for at least five minutes after discharge before charging again. Avoid deep discharge and keep no-load voltage greater than 3.5V per cell.

Charge the battery only when use is intended shortly afterward, and avoid frequent high-current charging unless necessary. For long-term storage, maintain 3.85V per cell at 5-28°C. Do not store it at 4.2V per cell, leave it in high-temperature environments, or store it below 3.7V per cell for extended periods. Complete a full charge-discharge cycle at least once per month to maintain cell health. Before transport on public conveyances, discharge the battery to 3.6V per cell.

Specifications

SpecificationValue & conditions
ProductBoslipo S8 Version 1605mAh 160C 6S FPV Battery
Capacity1605mAh
C rating160C
Cell configuration6S1P
Pack voltage22.2V
Power connectorXT60 plug
Nominal cell voltage3.7V per cell
Maximum cell charge voltageMust not exceed 4.2V per cellDuring charging.
Charging supervisionNever leave unattendedDuring charging.
Full-charge storage restrictionDo not store at 4.2V per cellDuring storage.
Heat exposure restrictionAvoid high-temperature environmentsDuring storage or when leaving the battery unused.
Rest intervalAt least 5 minutesAfter discharge, before charging.
Cell voltage lower limitGreater than 3.5V per cell; avoid deep dischargeMeasured with no load.
Charging timingCharge only when use is intended shortly afterwardWhen charging for subsequent use.
Fast-charging restrictionAvoid frequent high-current charging unless necessaryWhen considering high-current charging.
Maintenance cycleA complete charge-discharge cycle at least once per monthFor cell maintenance.
Low-voltage storage restrictionNever store below 3.7V per cellFor extended storage periods.
Storage charge voltage3.85V per cellFor long-term storage.
Storage temperature5-28°CFor long-term storage at 3.85V per cell.
Transport charge voltageDischarge to 3.6V per cellWhen transporting on public conveyances.

Ask for the Boslipo S8 Version 1605mAh 160C 6S FPV Battery price ↑

Related guides

WES 24S 70Ah 6048Wh drone battery with silver housing and black cables
Component

WES Battery WES 24S 70Ah 6048Wh Drone Battery

WES Battery

The WES 24S 70Ah 6048Wh is a semi-solid-state battery for heavy industrial hexacopters and octocopters. It combines an 86.4V architecture with intelligent battery management, parallel-pack operation and IP54 protection. Integration requires space for a 361×203×262 mm pack and allowance for its 22.5 kg mass.

SkyRC iMAX B6mini battery charger with blue housing, LCD screen and four control buttons
Component

SKYRC iMAX B6mini Charger

SKYRC

The SkyRC iMAX B6mini Charger is a compact battery charge/discharge station with integrated lithium balancing, 60 W maximum charging power and 5 W maximum discharge power. It supports multiple battery chemistries, PC control and battery measurement functions. Supplied connection leads accompany the charger; temperature sensing and smartphone operation require optional accessories.

BrotherHobby 3-8S PFB filter board V1 with two cylindrical capacitors and gold connection tabs
Component

3-8S PFB filter board V1

By BrotherHobby

The BrotherHobby 3-8S PFB filter board V1 is an electrical filter board with TVS transient suppression diode protection. It specifies a 3-8S input and VBAT output, measures 36.6mm*21.6mm*14.4mm, and weighs 5.8g.

ZHT K63E power distribution board with a green circuit board and four rectangular openings
Component

ZHTAERO ZHT K63E

ZHTAERO

The ZHT Technology Co., Ltd. ZHT K63E is a highly integrated power distribution board combining current sensing, optocoupler control, power and step-down modules, an ESC signal line and LED. It operates at 30-63V (6-14S), supplies 5.4V and 24V outputs, and supports a maximum continuous current of 70A.

KEEP EXPLORING

Similar products

Browse all products ↗
SkyRC PC1080-6S battery charger with two displays and a carrying handle
Batteries & charging

SkyRC PC1080-6S Battery Charger

SKYRC

The SkyRC PC1080-6S is a mains-powered, dual-channel charger for industrial drone batteries. It supports 6S LiPo and LiHV packs, delivering 1080W total charging output with charging, balancing and storage functions. The package includes the charger, AC cord and manual; optional hubs extend sequential battery handling.

SKYRC Multi Function Power Hub SK-600097-02 circuit board with micro USB port and buzzer
Batteries & charging

SKYRC Multi Function Power Hub

SKYRC

The SkyRC Multi Function Power Hub SK-600097-02 is a six-in-one FPV quadcopter power accessory that simplifies wiring, powers onboard equipment and supplies USB power. The 11.5g hub supports 2-6S LiPo input and combines BEC outputs with selectable LED modes and buzzer alerts.