ChinaDroneRequest a quote →
Aocoda-RC F405 V3 flight controller board with USB-C port and gold solder padsAocoda-RC F405 V3 flight controller board with USB-C port and gold solder pads

Aocoda-RC F405 V3

The Aocoda-RC F405 V3 is a racing drone flight controller with a 168MHz STM32F405RGT6 processor, OSD, barometer and 16MB Blackbox. Its 37mm × 37mm board offers five UARTs, switchable dual camera inputs and USB Type-C. Supplied equipment includes a connection cable and four shock-absorbing balls.

Aocoda-RCDrone flight controller
Weight
9.4 g
Dimensions
37 mm*37 mm

Get a free quote

Product overview

The Aocoda-RC F405 V3 flight controller brings OSD, a barometer and Blackbox storage to racing drone builds. Its STM32F405RGT6 processor runs at 168MHz with 1MB Flash, alongside an SPL06-001 barometer, AT7456E OSD and 16MB Blackbox. The V3.0-ICM version uses an ICM42688 IMU on SPI1, while the V3.0-MPU version uses an MPU6888 on SPI1. Connections include five UARTs, ten PWM outputs including the LED strip pad, one I2C interface and three ADC inputs for VBAT, RSSI and CURR.

The 37mm × 37mm board weighs 9.4g and has an M3 30.5mm × 30.5mm × 1.6mm mounting specification. It accepts 12.6~25.2V from a 3~6S LiPo and provides BEC ratings of 5V/2.5A and 9V/2.5A(Max.2.7A). USB Type-C, a built-in SBUS inverter and switchable dual camera inputs support integration, with DJI FPV OSD supported through any spare UART. There is no built-in current sensor. The package includes one F405 V3 flight controller, one 8PIN SH1.0mm connection cable and four M3 *8 shock-absorbing balls.

The firmware target is AOCODARCF405V3 for BetaFlight, INAV and ArduPilot (ChiBiOS). Static current consumption is 200mA at 5V with Betaflight and 150mA at 5V with ArduPilot. Three LEDs provide blue and red flight controller status indications and a red 3V indication.

Flight control & navigation

Specifications

Aocoda-RC F405 V3 specifications
SpecificationValue & conditions
ProductAocoda-RC F405 V3 flight controller for racing drones
MCUSTM32F405RGT6, 168MHz, 1MB Flash
IMUICM42688 (SPI1)Board V3.0-ICM Version
IMUMPU6888 (SPI1)Board V3.0-MPU Version
BarometerSPL06-001 (I2C1)
OSDAT7456E(SPI2)
Blackbox16MB (SPI3)
UARTs5 (1, 2, 3, 4, 5)
PWM outputs10Including the LED strip pad.
I2C1
ADC3 (VBAT, RSSI, CURR)
Indicator LEDs3 LEDs: FC status (blue, red) and 3V indicator (red)
SBUS inputBuilt-in inverter
USB connectorUSB Type-C
Camera inputsDual camera input with free switching
DJI FPV OSD supportSupportedUsing any spare UART.
Vbat input12.6~25.2V3~6S LiPo.
BEC5V/2.5A, 9V/2.5A(Max.2.7A)
Built-in current sensorNone
Static power200mA@5V with Betaflight, 150mA@5V with ArduPilotAt 5V with Betaflight or ArduPilot, respectively.
Dimensions37mm*37mm
Mounting holeM3 30.5mm*30.5mm*1.6mm
Weight9.4g
BetaFlight targetAOCODARCF405V3BetaFlight firmware.
INAV targetAOCODARCF405V3INAV firmware.
ArduPilot targetAOCODARCF405V3ArduPilot (ChiBiOS) firmware.
Package contents1 F405 V3 flight controller; 1 8PIN SH1.0mm connection cable; 4 M3 *8 shock-absorbing ballsIncluded equipment.

Related guides