ChinaDroneRequest a quote →
Zhuhai Anqing Technology ADS-B receiver module with a shielded circuit board and connectorsZhuhai Anqing Technology ADS-B receiver module with a shielded circuit board and connectors

Zhuhai Anqing Technology ADS-B

The Zhuhai Anqing Technology ADS-B receiver module provides surrounding-airspace surveillance through raw ADS-B messages or decoded aircraft data. This compact, low-power, 7.5 g module combines filtered reception, serial communication and signal detection for ground equipment, virtual radar, airborne obstacle avoidance and UAV collision-risk monitoring.

ARCGinePayloads & thermal cameras
Applications
ADS-B reception, ground equipment, virtual radar, airborne obstacle avoidance, UAV collision-risk monitoring and airspace monitoring.
Weight
7.5 g
Supply voltage
3.7–9 V

Get a free quote

Product overview

The Zhuhai Anqing Technology ADS-B receiver module supports airspace monitoring, ground equipment, virtual radar, airborne obstacle avoidance and UAV collision-risk monitoring. Its serial output delivers raw ADS-B messages or decoded aircraft information, including ICAO identifier, flight number, position, altitude, speed and heading. ADS-B signal detection and indication complement a processing capacity of more than 100 targets. With a 5 dBi antenna, surveillance range is 250 km under line-of-sight conditions; installation position and radio visibility affect the achievable range.

The 7.5 g module incorporates two surface acoustic wave filter stages and a low-noise amplifier stage to suppress out-of-band noise, with typical receiver sensitivity of -98 dBm. It operates from 3.7–9 V, consumes less than 0.35 W and draws approximately 55 mA at 5 V. Connections comprise a 50 Ω IPEX generation 1 antenna interface and an XH1.25-5P connector carrying 3.3 V TTL UART data at 9600–921600 baud. Integrated antenna lightning protection and an operating temperature range of -40 °C to +85 °C complete its hardware features.

Cameras & sensors

Specifications

Zhuhai Anqing Technology ADS-B specifications
SpecificationValue & conditions
Product typeCompact, low-power ADS-B receiver module for surrounding-airspace situational awareness and surveillance.
Serial data outputRaw ADS-B messages or decoded aircraft information, including ICAO aircraft identifier, flight number, latitude, longitude, altitude, speed and heading.
Signal detectionSupports ADS-B signal detection and indication.
Receiver constructionTwo built-in surface acoustic wave filter stages and one low-noise amplifier stage suppress out-of-band noise to improve signal-to-noise ratio.
Receiver sensitivity-98 dBmTypical receiving sensitivity.
Surveillance range250 kmLine of sight with a 5 dBi antenna; range depends on installation position and radio line-of-sight conditions.
Target processing capacityGreater than 100 targets
Supply voltage3.7–9 V
Power consumptionLess than 0.35 W
Current consumptionApproximately 55 mA5 V input supply.
Antenna interfaceIPEX generation 1, 50 Ω impedance
Communication interfaceXH1.25-5P connector; 3.3 V TTL serial interface; UART data format N,8,1.
Baud rate range9600–921600 baud
Antenna protectionIntegrated antenna lightning protection.
Supported message formatsDF17/DF1-only output, or all Mode S messages DF0/DF4/DF5/DF11/DF16/DF17/DF18/DF20/DF21; output can include a signal-strength indicator.Raw-message output modes.
Weight7.5 g
Temperature range-40 °C to +85 °COperating temperature.
ApplicationsADS-B reception, ground equipment, virtual radar, airborne obstacle avoidance, UAV collision-risk monitoring and airspace monitoring.

Related guides